Προϊόντα

External micrometers ULTRA active in box Spherical measuring faces Ø 6,5mm / R 5mm, pitch 0,5mm Size: 25-50/0,01mm Article number: 206...

Measure the height of crimp contact Resolution 0.01mm Ratchet stop

Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 or 5 flutes Ratchet stop Carbide measuring faces Supplied ...

Measure the groove diameter of shafts and keyways Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm).

Measure thickness of disk brakes Ratchet stop Carbide measuring faces Supplied with setting standards.

Ratchet stop Carbide measuring faces Supplied with setting standards.

Anvil retracting range: 8mm Carbide measuring faces Supplied with setting standards (except 0-25mm) Optional accessory: dial indicators (graduatio...

Ratchet stop Carbide measuring faces Supplied with setting standards Optional accessory: dial indicators (graduation 0.01mm), digital indicators (...

Το Μικρόμετρο σπειρωμάτων είναι ένα εξειδικευμένο εργαλείο μέτρησης που χρησιμοποιείται για την ακριβή μέτρηση της μέσης διαμέτρου (Pitch Diameter)...

Measure width of grooves inside bores Non-rotating spindle Two graduations for inside and outside measurement.

Measure diameter of wires and small balls Ratchet stop Carbide measuring faces.

Deep frame suitable for sheet metal, paper and plastic Ratchet stop Carbide measuring faces.

Measure hub thickness and shoulder inside a bore Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Non-rotating spindle Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Accuracy: (3+n+L/50)μm n=number of rods, L=maximum measuring length(mm) Travel of micrometer head 25mm Supplied with setting standards Carbide mea...

Μικρόμετρο ειδικό για μέτρηση τρύπας τύπου "με σφυράκια" του οίκου οργάνων μέτρησης της Insize. Συνοδεύεται από διετής εγγύηση.  Η εύκολη χρήση και...

Accuracy: (3+n+L/50)μm n=number of rods, L=maximum measuring length(mm) Supplied with setting standards Carbide measuring faces.

Accuracy: (7+n+L/50)μm n=number of rods, L=maximum measuring length(mm) Travel of micrometer head 50mm Carbide measuring faces

Μικρόμετρα μέχρι 500mm σύμφωνα με DIN863-4 Ανάγνωση 0,01mm Πέλματα καρβιδίου Προαιρετικά εξαρτήματα: gage block accessory (κωδικός 6881), cylinde...