{"title":"Inserts DN--1504","description":"\u003cp\u003e\u003cstrong\u003eDN--1504 inserts\u003c\/strong\u003e are 55° negative-turning lathe inserts (DNMA\/DNMG) designed for stable external\/internal turning with long tool life in demanding cuts. The chipbreaker controls chip formation and evacuation, directly impacting surface finish, process stability, and safety.\u003c\/p\u003e\u003cp\u003eAvailable in multiple chipbreaker geometries and carbide grades with different coatings (e.g., for steel, stainless, cast iron), to match varying depths of cut and feed rates. Options from \u003cstrong\u003eYg\u003c\/strong\u003e \u0026 \u003cstrong\u003eEchain\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eWhen selecting, consider workpiece material, roughing vs finishing, and toolholder rigidity to maximize performance and reduce vibration.\u003c\/p\u003e","products":[{"product_id":"dnma1504-plakidia-dnma1504-gia-mantemi-baries-kopes-kai","title":"DNMA1504 Inserts for Cast Iron - Heavy Cuts and Roughing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(..MA)\u003c\/em\u003e\u003c\/strong\u003e - Designed for machining brittle materials such as cast irons and coated steels. It has no geometry on the cutting edge. Suitable for heavy roughing **\u003cem\u003e\u003cem\u003e(\u003c\/em\u003eroughing\u003c\/em\u003e) in cast irons and light machining in coated steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~5.0 \/ 0.4 \/ YG1010","offer_id":52950446014787,"sku":"DNMA150404-YG1010","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.0~5.0 \/ 0.8 \/ YG1010","offer_id":52950446047555,"sku":"DNMA150408-YG1010","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.0~5.0 \/ 0.8 \/ YG3010","offer_id":52950446080323,"sku":"DNMA150408-YG3010","price":7.3,"currency_code":"EUR","in_stock":true},{"title":"1.5~5.0 \/ 1.2 \/ YG1010","offer_id":52950446113091,"sku":"DNMA150412-YG1010","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMA150408.png?v=1739794347"},{"product_id":"dnmg1504-uf-plakidia-dnmg1504-uf-gia-atsalia-finirisma","title":"DNMG1504**-UF Inserts for Steels - Finishing","description":"\u003ch3\u003eWorkpiece Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing in steels. It features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and is available with \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3115\u003c\/em\u003e\u003c\/strong\u003e – New grade for high cutting speeds in steels (P15–P25). CVD MT-TiCN–Al₂O₃ coating. Ideal for mass production with stable tool life and minimization of built-up edge formation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.05~0.25 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=180~500 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=60~300 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is, the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum performance and tool life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~2.5 \/ 0.4 \/ YG3020","offer_id":52950453125443,"sku":"DNMG150404-UF-YG3020","price":7.3,"currency_code":"EUR","in_stock":true},{"title":"0.5~2.5 \/ 0.4 \/ YG3115","offer_id":52950453158211,"sku":"DNMG150404-UF-YG3115","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.0~2.5 \/ 0.8 \/ YG3115","offer_id":52950453190979,"sku":"DNMG150408-UF-YG3115","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~2.5 \/ 1.2 \/ YG3115","offer_id":52950453223747,"sku":"DNMG150412-UF-YG3115","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-UF_YG3115.png?v=1739795148"},{"product_id":"dnmg1504-oc-plakidia-dnmg1504-oc-gia-atsalia-kai-inox","title":"DNMG1504**-OC Inserts for Steel and Stainless Steel - General Purpose","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEconomical lathe inserts from Echain\u003c\/strong\u003e, a cutting tool manufacturer from Taiwan.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the waste, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and lifespan.\u003c\/p\u003e","brand":"Echain","offers":[{"title":"15-04 \/ 08 \/ ECM200","offer_id":52591755460931,"sku":"DNMG150408-OC","price":5.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-MG.png?v=1739795148"},{"product_id":"dnmg1504-um-plakidia-dnmg1504-um-gia-atsalia-diakoptomenh","title":"DNMG1504**-UM Inserts for Steels - Interrupted Cutting","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UM)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of steels. It has a relatively \u003cstrong\u003esmall\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining and interrupted cutting. Combines \u003cstrong\u003ehigh toughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ewear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3030\u003c\/em\u003e\u003c\/strong\u003e – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and balance of wear and coating chipping resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~350 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~280 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~110 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~3.0 \/ 0.4 \/ YG3030","offer_id":52950454174019,"sku":"DNMG150404-UM-YG3030","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.0~3.0 \/ 0.8 \/ YG3030","offer_id":52950454206787,"sku":"DNMG150408-UM-YG3030","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~3.0 \/ 1.2 \/ YG3030","offer_id":52950454239555,"sku":"DNMG150412-UM-YG3030","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-UM_YG3115.png?v=1739795390"},{"product_id":"dnmg1504-ug-plakidia-dnmg1504-ug-gia-atsalia-synexh-koph","title":"DNMG1504**-UG Inserts for Steels - Continuous Cutting","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UG)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of steels. It features a relatively \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining and continuous cutting. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3020\u003c\/em\u003e\u003c\/strong\u003e – First choice for general steel machining (P15–P30). CVD TiCN–Al₂O₃ coating. Substrate specially designed for high toughness and smooth surface for increased wear resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=160~380 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=140~320 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=60~130 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~3.0 \/ 0.4 \/ YG3125","offer_id":52950454042947,"sku":"DNMG150404-UG-YG3125","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.0~3.0 \/ 0.8 \/ YG3125","offer_id":52950454075715,"sku":"DNMG150408-UG-YG3125","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~3.0 \/ 1.2 \/ YG3125","offer_id":52950454108483,"sku":"DNMG150412-UG-YG3125","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-UG_YG3115_612b5e73-aa4e-4e67-91ed-1d1eff2959df.png?v=1780567629"},{"product_id":"dnmg1504-uc-plakidia-dnmg1504-uc-gia-mantemi-finirisma","title":"DNMG1504**-UC Inserts for Cast Iron - Finishing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UC)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining and finishing on cast iron. It features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for soft cast irons. Ensures very good surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~4.0 \/ 0.8 \/ YG1010","offer_id":52950450831683,"sku":"DNMG150408-UC-YG1010","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~4.0 \/ 1.2 \/ YG1010","offer_id":52950450864451,"sku":"DNMG150412-UC-YG1010","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-UC_YG3115.png?v=1739795545"},{"product_id":"dnmg1504-ur-plakidia-dnmg1504-ur-gia-atsalia-baries-kopes","title":"Inserts DNMG1504**-UR for Steels - Heavy Cuts and Roughing","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoughing Tool\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UR)\u003c\/em\u003e\u003c\/strong\u003e - Geometry designed for roughing and interrupted machining in steels. It features a relatively \u003cstrong\u003emoderate\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for heavy roughing \u003cstrong\u003e\u003cem\u003e*(\u003c\/em\u003eroughing*) and interrupted cuts. It combines \u003c\/strong\u003ehigh toughness\u003cstrong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003c\/strong\u003ewear resistance\u003cem\u003e\u003cem\u003e (\u003c\/em\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3030\u003c\/em\u003e\u003c\/strong\u003e – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and balance of wear and coating chipping resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.30~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~350 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~280 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~110 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003eroughing tool\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~5.0 \/ 0.8 \/ YG3030","offer_id":52950454337859,"sku":"DNMG150408-UR-YG3030","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~5.0 \/ 1.2 \/ YG3030","offer_id":52950454370627,"sku":"DNMG150412-UR-YG3030","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~5.0 \/ 1.2 \/ YG3020","offer_id":52950454403395,"sku":"DNMG150412-UR-YG3020","price":7.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-UR_YG3115.png?v=1739795589"},{"product_id":"dnmg1504-mf-plakidia-dnmg1504-mf-gia-inox-finirisma","title":"DNMG1504**-MF Inserts for Stainless Steel - Finishing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing stainless steels. It features a \u003cstrong\u003erelatively small rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and is available with relatively \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG211\u003c\/em\u003e\u003c\/strong\u003e – First choice for finishing stainless steels (M05–M25). PVD TiAlN coating for excellent wear resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.07~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~270 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~230 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~100 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.2~1.5 \/ 0.4 \/ YG213","offer_id":52950446506307,"sku":"DNMG150404-MF-YG213","price":7.3,"currency_code":"EUR","in_stock":true},{"title":"0.2~1.5 \/ 0.4 \/ YG211","offer_id":52950446539075,"sku":"DNMG150404-MF-YG211","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"0.2~1.5 \/ 0.8 \/ YG211","offer_id":52950446571843,"sku":"DNMG150408-MF-YG211","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-MF.png?v=1739795656"},{"product_id":"dnmg1504-mg-plakidia-dnmg1504-mg-gia-atsalia-kai-inox","title":"DNMG1504**-MG Inserts for Steel and Stainless Steel - General Purpose","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MG)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of stainless steels. It features a relatively \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining of stainless steel and steel. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG2025\u003c\/em\u003e\u003c\/strong\u003e – New CVD grade for stainless steels with high speed (M15–M35). New CVD TiCN - Al₂O₃ coating technology. Combination of new substrate and coating for excellent wear resistance and minimization of built-up edge formation. Also works excellently on steels - alloy steels (ISO P group)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~220 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~200 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~220 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~200 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum performance and tool life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~4.0 \/ 0.4 \/ YG2025","offer_id":52950446670147,"sku":"DNMG150404-MG-YG2025","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.0~4.0 \/ 0.8 \/ YG2025","offer_id":52950446702915,"sku":"DNMG150408-MG-YG2025","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"1.5~4.0 \/ 1.2 \/ YG2025","offer_id":52950446735683,"sku":"DNMG150412-MG-YG2025","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-MG_4ae93cc5-8108-4f4a-948d-8d32c9085943.png?v=1739795721"},{"product_id":"dnmg1504-mr-plakidia-dnmg1504-mr-gia-inox-baries-kopes-kai","title":"DNMG1504**-MR Inserts for Stainless Steel - Heavy Cuts and Roughing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MR)\u003c\/em\u003e\u003c\/strong\u003e - Geometry designed for roughing stainless steels. It features a \u003cstrong\u003esmall\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a large flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for heavy roughing operations \u003cstrong\u003e\u003cem\u003e*(\u003c\/em\u003eroughing*). Designed for \u003c\/strong\u003ehigh toughness\u003cem\u003e\u003cem\u003e (\u003c\/em\u003etoughness\u003c\/em\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG214\u003c\/em\u003e\u003c\/strong\u003e – For interrupted heavy machining on stainless steel (M30–M40 \/ S25–S30). PVD TiAlN coating. Minimizes the risk of cracks and coating chipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e =  0.30~0.55 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~150 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~150 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~50 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"2.0~5.5 \/ 0.8 \/ YG214","offer_id":52950446833987,"sku":"DNMG150408-MR-YG214","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"2.0~5.5 \/ 1.2 \/ YG214","offer_id":52950446866755,"sku":"DNMG150412-MR-YG214","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-MR.png?v=1739795769"},{"product_id":"dnmg1504-sm-plakidia-dnmg1504-sm-gia-yperkramata","title":"DNMG1504**-SM Inserts for Superalloys","description":"\u003ch3\u003eWorkpiece Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S)\u003c\/em\u003e\u003c\/strong\u003e - Heat Resistant Superalloys (Fe,Ni,Co) - Titanium Alloys (HRSA, Titanium alloys)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(SM)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for general machining of superalloys and titanium alloys. Features a \u003cstrong\u003emoderate rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e). Suitable for medium machining. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG401\u003c\/em\u003e\u003c\/strong\u003e – For superalloys (HRSA) (S10–S20). Durable PVD TiAlSiN coating for excellent protection and lubrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~90 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~3.0 \/ 0.8 \/ YG401","offer_id":52950449193283,"sku":"DNMG150408-SM-YG401","price":8.5,"currency_code":"EUR","in_stock":true},{"title":"0.5~3.0 \/ 1.2 \/ YG401","offer_id":52950449226051,"sku":"DNMG150412-SM-YG401","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-SM.png?v=1739795832"},{"product_id":"dnmg1504-psf-plakidia-dnmg1504-psf-cermet-gia-atsalia","title":"DNMG1504**-PSF Cermet Inserts for Steel, Cast Iron, and Stainless Steel - Finishing","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Inox)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(PSF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing on steels, stainless steels, and cast irons. Features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e and is available with \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Used for cermet grades. Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYT100\u003c\/em\u003e\u003c\/strong\u003e – New generation general-purpose cermet (P10–P20 \/ M10–M20 \/ K10–K20). Increased wear resistance, with a special surface for top finishing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.10~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~480 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=160~480 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~180 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~180 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~260 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~400 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is, the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.4~3.0 \/ 0.4 \/ YT100","offer_id":52950447849795,"sku":"DNMG150404-PSF-YT100","price":7.7,"currency_code":"EUR","in_stock":true},{"title":"0.6~3.0 \/ 0.8 \/ YT100","offer_id":52950447882563,"sku":"DNMG150408-PSF-YT100","price":7.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-PSF_YT100.png?v=1739796232"},{"product_id":"dngg1504-sf-plakidia-dngg1504-sf-gia-ypekramata-finirisma","title":"DNGG1504**-SF Inserts for Superalloys - Finishing","description":"\u003ch3\u003eWorkpiece Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S)\u003c\/em\u003e\u003c\/strong\u003e - High-Temperature Superalloys (Fe,Ni,Co) - Titanium Alloys (HRSA, Titanium alloys)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(SF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing machining of superalloys and titanium alloys. Features a \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) with short length and is available with \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG401\u003c\/em\u003e\u003c\/strong\u003e – For superalloys (HRSA) (S10–S20). Durable PVD TiAlSiN coating for excellent protection and lubrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.10~0.25 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~90 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"15-04 \/ 04 \/ YG401","offer_id":52591926640963,"sku":"DNGG150404-SF-YG401","price":11.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNGG150408-SF.png?v=1739798038"},{"product_id":"dnmg1504-io-plakidia-dnmg1504-io-gia-atsalia","title":"DNMG1504**-IO Inserts for Steels","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEconomical lathe inserts from Echain\u003c\/strong\u003e, a cutting tool manufacturer from Taiwan.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the waste, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and lifespan.\u003c\/p\u003e","brand":"Echain","offers":[{"title":"15-04 \/ 08 \/ ECP200","offer_id":52591944761667,"sku":"DNMG150408-IO","price":5.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/DNMG150408-UC_YG3115_168bea69-a528-497c-b934-0c5c3ef8fbfe.png?v=1739798395"},{"product_id":"dnmg1504-al-plakidia-dnmg1504-al-gia-alouminio","title":"DNMG1504**-AL Inserts for Aluminum","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(N)\u003c\/em\u003e\u003c\/strong\u003e - Non-ferrous materials - Aluminum, Copper alloys, Plastic (Aluminum, Copper alloys, non metallic materials)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(AL)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of aluminum and non-metallic materials. It features a \u003cstrong\u003eparticularly large rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and to avoid built-up edge due to material adhesion on the cutting edge. Suitable for moderate machining of soft materials (sticky materials).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLathe inserts from Korloy\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Korloy","offers":[{"title":"15-04 \/ 08 \/ H01","offer_id":52591997681987,"sku":"DNMG150408-AL","price":7.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/data_c7fef968-2ab8-4632-b764-3e78953ad0bb.jpg?v=1739799308"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/collections\/DN1504_d0dadc10-9808-4ede-9139-fa6b6f311910.jpg?v=1772785157","url":"https:\/\/organametrisis.gr\/en\/collections\/dn-1504-inserts\/%cf%87%cf%81%ce%ae%cf%83%ce%b7_%ce%bc%ce%b1%ce%bd%cf%84%ce%ad%ce%bc%ce%b9.oembed","provider":"Όργανα Μέτρησης","version":"1.0","type":"link"}