{"title":"Inserts SN--","description":"\u003cp\u003e\u003cstrong\u003eSN-- inserts\u003c\/strong\u003e are indexable negative 90° turning inserts (e.g., SNMA\/SNMG) designed for stable roughing and finishing. Their square geometry delivers strong cutting edges and reliable performance under heavy loads.\u003c\/p\u003e\u003cp\u003eAvailable with multiple chipbreaker geometries and carbide grades with PVD\/CVD coatings, suited for steel, stainless, cast iron and difficult alloys. Options from \u003cstrong\u003eYg\u003c\/strong\u003e, \u003cstrong\u003eDijet\u003c\/strong\u003e \u0026 \u003cstrong\u003eTaegutec\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eWhen selecting, match chipbreaker and grade to the workpiece material, feed\/depth of cut and surface target to control chips and maximize tool life.\u003c\/p\u003e","products":[{"product_id":"snma1204-plakidia-snma1204-gia-mantemi-baries-kopes-kai","title":"SNMA1204** Inserts for Cast Iron - Heavy Cuts and Roughing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(..MA)\u003c\/em\u003e\u003c\/strong\u003e - Designed for machining brittle materials such as cast irons and coated steels. It has no geometry on the cutting edge. Suitable for heavy roughing **\u003cem\u003e\u003cem\u003e(\u003c\/em\u003eroughing\u003c\/em\u003e) in cast irons and light machining in coated steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e. the geometry that helps break and remove the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~5.0 \/ 0.8 \/ YG3010","offer_id":52950460236099,"sku":"SNMA120408-YG3010","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.0~5.0 \/ 0.8 \/ YG1010","offer_id":52950460268867,"sku":"SNMA120408-YG1010","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~5.0 \/ 1.2 \/ YG1010","offer_id":52950460301635,"sku":"SNMA120412-YG1010","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.0~6.0 \/ 1.6 \/ YG1010","offer_id":52950460334403,"sku":"SNMA120416-YG1010","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMA120408.png?v=1739868833"},{"product_id":"snmg1204-uf-plakidia-snmg1204-uf-gia-atsalia-finirisma","title":"SNMG1204**-UF Inserts for Steels - Finishing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing on steels. It features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and is available with \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3115\u003c\/em\u003e\u003c\/strong\u003e – New grade for high machining speeds on steels (P15–P25). CVD MT-TiCN–Al₂O₃ coating. Ideal for mass production with stable tool life and minimization of built-up edge formation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.05~0.25 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=180~500 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=60~300 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is, the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum performance and tool life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~1.5 \/ 0.4 \/ YG3115","offer_id":52950460989763,"sku":"SNMG120404-UF-YG3115","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"0.5~1.5 \/ 0.4 \/ YG3020","offer_id":52950461022531,"sku":"SNMG120404-UF-YG3020","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.0~2.5 \/ 0.8 \/ YG3115","offer_id":52950461055299,"sku":"SNMG120408-UF-YG3115","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-UF_YG3115.png?v=1739868882"},{"product_id":"snmg1204-um-plakidia-snmg1204-um-gia-atsalia-diakoptomenh","title":"SNMG1204**-UM Inserts for Steels - Interrupted Cutting","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UM)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of steels. It has a relatively \u003cstrong\u003esmall\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining and interrupted cutting. Combines \u003cstrong\u003ehigh toughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ewear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3030\u003c\/em\u003e\u003c\/strong\u003e – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and balance of wear and coating chipping resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~350 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~280 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~110 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~3.0 \/ 0.8 \/ YG3030","offer_id":52950461284675,"sku":"SNMG120408-UM-YG3030","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-UM_YG3115.png?v=1739868974"},{"product_id":"snmg1204-ug-plakidia-snmg1204-ug-gia-atsalia-synexh-koph","title":"SNMG1204**-UG Inserts for Steels - Continuous Cutting","description":"\u003ch3\u003eCutting Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UG)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of steels. It features a relatively \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining and continuous cutting. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3020\u003c\/em\u003e\u003c\/strong\u003e – First choice for general steel machining (P15–P30). CVD TiCN–Al₂O₃ coating. Substrate specially designed for high toughness and smooth surface for increased wear resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=160~380 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=140~320 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=60~130 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~3.0 \/ 0.8 \/ YG3125","offer_id":52950461153603,"sku":"SNMG120408-UG-YG3125","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~3.0 \/ 1.2 \/ YG3125","offer_id":52950461186371,"sku":"SNMG120412-UG-YG3125","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"2.0~3.0 \/ 1.6 \/ YG3125","offer_id":52950461219139,"sku":"SNMG120416-UG-YG3125","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-UG_YG3115.png?v=1780570826"},{"product_id":"snmg1204-uc-plakidia-snmg1204-uc-gia-mantemi-finirisma","title":"SNMG1204**-UC Inserts for Cast Iron - Finishing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UC)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining and finishing on cast iron. Features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for soft cast irons. Ensures very good surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~4.0 \/ 0.8 \/ YG1010","offer_id":52950460891459,"sku":"SNMG120408-UC-YG1010","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~4.0 \/ 1.2 \/ YG1010","offer_id":52950460924227,"sku":"SNMG120412-UC-YG1010","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-UC_YG3115_6b885128-66ea-4471-aaac-637fb30f03de.png?v=1739869087"},{"product_id":"snmg1204-ur-plakidia-snmg1204-ur-gia-atsalia-baries-kopes","title":"SNMG1204**-UR Inserts for Steels - Heavy Cuts and Roughing","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoughing Tool\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UR)\u003c\/em\u003e\u003c\/strong\u003e - Geometry designed for roughing and interrupted machining in steels. It features a relatively \u003cstrong\u003emoderate\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for heavy roughing \u003cstrong\u003e\u003cem\u003e*(\u003c\/em\u003eroughing*) and interrupted cuts. It combines \u003c\/strong\u003ehigh toughness\u003cstrong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003c\/strong\u003ewear resistance\u003cem\u003e\u003cem\u003e (\u003c\/em\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3030\u003c\/em\u003e\u003c\/strong\u003e – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and a balance of wear and coating chipping resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.30~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~350 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~280 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~110 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003eroughing tool\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~5.0 \/ 0.8 \/ YG3030","offer_id":52950461382979,"sku":"SNMG120408-UR-YG3030","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~5.0 \/ 1.2 \/ YG3020","offer_id":52950461415747,"sku":"SNMG120412-UR-YG3020","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~5.0 \/ 1.2 \/ YG3030","offer_id":52950461448515,"sku":"SNMG120412-UR-YG3030","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"2.0~5.0 \/ 1.6 \/ YG3030","offer_id":52950461481283,"sku":"SNMG120416-UR-YG3030","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG250924-UR.png?v=1739869129"},{"product_id":"snmg1204-mf-plakidia-snmg1204-mf-gia-inox-finirisma","title":"SNMG1204**-MF Inserts for Stainless Steel - Finishing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing stainless steels. It features a \u003cstrong\u003erelatively small rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and is available with relatively \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG211\u003c\/em\u003e\u003c\/strong\u003e – First choice for finishing stainless steels (M05–M25). PVD TiAlN coating for excellent wear resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.07~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~270 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~230 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~100 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.2~1.5 \/ 0.4 \/ YG211","offer_id":52950460465475,"sku":"SNMG120404-MF-YG211","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"0.2~1.5 \/ 0.8 \/ YG211","offer_id":52950460498243,"sku":"SNMG120408-MF-YG211","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"0.2~1.5 \/ 1.2 \/ YG211","offer_id":52950460531011,"sku":"SNMG120412-MF-YG211","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-MF.png?v=1739869160"},{"product_id":"snmg1204-mg-plakidia-snmg1204-mg-gia-atsalia-kai-inox","title":"SNMG1204**-MG Inserts for Steel and Stainless Steel - General Purpose","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MG)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of stainless steels. It features a relatively \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining of stainless steel and steel. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG2025\u003c\/em\u003e\u003c\/strong\u003e – New CVD grade for stainless steels with high speed (M15–M35). New CVD TiCN - Al₂O₃ coating technology. Combination of new substrate and coating for excellent wear resistance and minimization of built-up edge formation. Also works excellently on steels - alloy steels (ISO P group)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~220 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~200 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~220 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~200 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~4.0 \/ 0.4 \/ YG2025","offer_id":52950460563779,"sku":"SNMG120404-MG-YG2025","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.0~4.0 \/ 0.8 \/ YG2025","offer_id":52950460596547,"sku":"SNMG120408-MG-YG2025","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~4.0 \/ 1.2 \/ YG2025","offer_id":52950460629315,"sku":"SNMG120412-MG-YG2025","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-MG.png?v=1739869189"},{"product_id":"snmg1204-mr-plakidia-snmg1204-mr-gia-inox-baries-kopes-kai","title":"SNMG1204**-MR Inserts for Stainless Steel - Heavy Cuts and Roughing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoughing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MR)\u003c\/em\u003e\u003c\/strong\u003e - Geometry designed for roughing stainless steels. It features a \u003cstrong\u003esmall\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a large flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for heavy roughing operations \u003cstrong\u003e\u003cem\u003e*(\u003c\/em\u003eroughing*). Designed for \u003c\/strong\u003ehigh toughness\u003cem\u003e\u003cem\u003e (\u003c\/em\u003etoughness\u003c\/em\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG214\u003c\/em\u003e\u003c\/strong\u003e – For interrupted heavy machining on stainless steel (M30–M40 \/ S25–S30). PVD TiAlN coating. Minimizes the risk of cracks and coating chipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e =  0.30~0.55 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~150 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~150 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~50 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003eroughing\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"2.0~5.5 \/ 0.8 \/ YG214","offer_id":52950460694851,"sku":"SNMG120408-MR-YG214","price":7.0,"currency_code":"EUR","in_stock":true},{"title":"2.0~5.5 \/ 1.2 \/ YG214","offer_id":52950460727619,"sku":"SNMG120412-MR-YG214","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-MR.png?v=1739869226"},{"product_id":"snmg1204-sm-plakidia-snmg1204-sm-gia-yperkramata","title":"SNMG1204**-SM Inserts for Superalloys","description":"\u003ch3\u003eWorkpiece Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S)\u003c\/em\u003e\u003c\/strong\u003e - Heat Resistant Superalloys (Fe,Ni,Co) - Titanium Alloys (HRSA, Titanium alloys)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(SM)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for general machining of superalloys and titanium alloys. Features a \u003cstrong\u003emoderate rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e). Suitable for medium machining. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG401\u003c\/em\u003e\u003c\/strong\u003e – For superalloys (HRSA) (S10–S20). Durable PVD TiAlSiN coating for excellent protection and lubrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~90 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is, the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~3.0 \/ 0.8 \/ YG401","offer_id":52950460825923,"sku":"SNMG120408-SM-YG401","price":7.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG120408-SM.png?v=1739869262"},{"product_id":"snma1204-ha-plakidia-snma1204-ha-gia-bammena","title":"SNMA1204**-HA Inserts for Painted Surfaces","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(..MA)\u003c\/em\u003e\u003c\/strong\u003e - Designed for machining brittle materials such as cast irons and coated steels. It has no geometry on the cutting edge. Suitable for heavy roughing **\u003cem\u003e\u003cem\u003e(\u003c\/em\u003eroughing\u003c\/em\u003e) in cast irons and light machining in coated steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e. the geometry that helps break and remove the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Dijet","offers":[{"title":"12 \/ 08 \/ JC110V","offer_id":52597717008707,"sku":"SNMA120408-HA","price":9.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/s-l1200_de591388-231b-4a94-a7a5-867f9c0ff85d.jpg?v=1739871335"},{"product_id":"snmg1204-al-plakidia-snmg1204-al-gia-alouminio","title":"SNMG1204**-AL Inserts for Aluminum","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(N)\u003c\/em\u003e\u003c\/strong\u003e - Non-ferrous materials - Aluminum, Copper alloys, Plastic (Aluminum, Copper alloys, non metallic materials)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(AL)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of aluminum and non-metallic materials. It features a \u003cstrong\u003eparticularly large rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and to avoid built-up edge due to material adhesion on the cutting edge. Suitable for medium machining of soft (sticky) materials.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLathe inserts from Korloy\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Korloy","offers":[{"title":"12 \/ 08 \/ H01","offer_id":52597756297539,"sku":"SNMG120408-AL","price":6.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/SNMG-120408-ALU-AK10-CARBIDE-INSERT-TURNING-ALUMINIUM.jpg?v=1739871802"},{"product_id":"snga1204-ce-plakidia-snga1204-ce-keramika-gia-bammena","title":"SNGA1204**-CE Ceramic Inserts for Painted Surfaces","description":"","brand":"Taegutec","offers":[{"title":"12 \/ 08 \/ CE","offer_id":52597787820355,"sku":"SNGA120408-CE","price":14.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/datasnga.jpg?v=1739872263"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/collections\/SN--12.png?v=1772785157","url":"https:\/\/organametrisis.gr\/en\/collections\/sn-12-inserts\/%cf%87%cf%81%ce%ae%cf%83%ce%b7_%ce%b3%ce%b5%ce%bd%ce%b9%ce%ba%ce%ae-%ce%b1%cf%84%cf%83%ce%ac%ce%bb%ce%b9.oembed","provider":"Όργανα Μέτρησης","version":"1.0","type":"link"}