{"title":"WN--06 Inserts","description":"\u003cp\u003e\u003cstrong\u003eWN--06 inserts\u003c\/strong\u003e are 80° negative turning inserts (WNMA\/WNMG) designed for stable lathe machining with high edge strength under heavy loads. They support both roughing and finishing, helping control chip evacuation and maintain consistent surface quality.\u003c\/p\u003e\u003cp\u003eAvailable with multiple chipbreaker geometries and carbide grades with different coatings to match steel, stainless, cast iron or alloys. Choose geometry and grade based on feed, depth of cut and target tool life, from \u003cstrong\u003eYg\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eWell suited for production turning in machine shops and manufacturing lines where repeatability and fast tool changes matter.\u003c\/p\u003e","products":[{"product_id":"wnmg0604-mr-plakidia-wnmg0604-mr-gia-inox-baries-kopes-kai","title":"WNMG0604**-MR Inserts for Stainless Steel - Heavy Cuts and Roughing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoughing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MR)\u003c\/em\u003e\u003c\/strong\u003e - Geometry designed for roughing stainless steels. It features a \u003cstrong\u003esmall\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a large flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for heavy roughing operations \u003cstrong\u003e\u003cem\u003e*(\u003c\/em\u003eroughing*). Designed for \u003c\/strong\u003ehigh toughness\u003cem\u003e\u003cem\u003e (\u003c\/em\u003etoughness\u003c\/em\u003e).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG214\u003c\/em\u003e\u003c\/strong\u003e – For interrupted heavy machining on stainless steel (M30–M40 \/ S25–S30). PVD TiAlN coating. Minimizes the risk of cracks and coating chipping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e =  0.30~0.55 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~150 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=100~150 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~50 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003eroughing\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"2.0~5.5 \/ 1.2 \/ YG214","offer_id":52950504931651,"sku":"WNMG060412-MR-YG214","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-MR.png?v=1739969920"},{"product_id":"wnmg0604-mg-plakidia-wnmg0604-mg-gia-atsalia-kai-inox","title":"WNMG0604**-MG Inserts for Steel and Stainless Steel - General Purpose","description":"\u003ch3\u003eWorkpiece Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MG)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of stainless steels. It features a relatively \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining of stainless steel and steel. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG2025\u003c\/em\u003e\u003c\/strong\u003e – New CVD grade for stainless steels with high speed (M15–M35). New CVD TiCN - Al₂O₃ coating technology. Combination of new substrate and coating for excellent wear resistance and minimization of built-up edge formation. Also works excellently on steels - alloy steels (ISO P group)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~220 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~200 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~220 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~200 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~3.0 \/ 0.4 \/ YG2025","offer_id":52950504767811,"sku":"WNMG060404-MG-YG2025","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.0~3.0 \/ 0.8 \/ YG2025","offer_id":52950504800579,"sku":"WNMG060408-MG-YG2025","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~3.0 \/ 1.2 \/ YG2025","offer_id":52950504833347,"sku":"WNMG060412-MG-YG2025","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-MG.png?v=1739970012"},{"product_id":"wnmg0604-mf-plakidia-wnmg0604-mf-gia-inox-finirisma","title":"WNMG0604**-MF Inserts for Stainless Steel - Finishing","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M)\u003c\/em\u003e\u003c\/strong\u003e - Stainless Steels (Stainless Steel - Inox)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(MF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing stainless steels. It features a \u003cstrong\u003erelatively small rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and is available with relatively \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG211\u003c\/em\u003e\u003c\/strong\u003e – First choice for finishing stainless steels (M05–M25). PVD TiAlN coating for excellent wear resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.07~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M12-13)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~270 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(M14)\u003c\/em\u003e\u003c\/strong\u003e - Vc=150~230 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S31-37)\u003c\/em\u003e\u003c\/strong\u003e - Vc=30~100 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.2~1.5 \/ 0.4 \/ YG211","offer_id":52950504538435,"sku":"WNMG060404-MF-YG211","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"0.2~1.5 \/ 0.8 \/ YG211","offer_id":52950504571203,"sku":"WNMG060408-MF-YG211","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"0.2~1.5 \/ 0.8 \/ YG401","offer_id":52950504603971,"sku":"WNMG060408-MF-YG401","price":5.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-MF.png?v=1739970078"},{"product_id":"wnmg0604-ur-plakidia-wnmg0604-ur-gia-atsalia-baries-kopes","title":"WNMG0604**-UR Inserts for Steels - Heavy Cuts and Roughing","description":"\u003ch3\u003eCutting Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRoughing Tool\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UR)\u003c\/em\u003e\u003c\/strong\u003e - Geometry designed for roughing and interrupted cutting in steels. It has a relatively \u003cstrong\u003emoderate\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for heavy roughing \u003cstrong\u003e\u003cem\u003e*(\u003c\/em\u003eroughing*) and interrupted cuts. It combines \u003c\/strong\u003ehigh toughness\u003cstrong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003c\/strong\u003ewear resistance\u003cem\u003e\u003cem\u003e (\u003c\/em\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3030\u003c\/em\u003e\u003c\/strong\u003e – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and balance of wear and coating chipping resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.30~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~350 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~280 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~110 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003eroughing tool\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.5~4.0 \/ 1.2 \/ YG3030","offer_id":52950505554243,"sku":"WNMG060412-UR-YG3030","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.5~4.0 \/ 1.2 \/ YG3020","offer_id":52950505587011,"sku":"WNMG060412-UR-YG3020","price":5.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-UR_YG3115.png?v=1739970522"},{"product_id":"wnmg0604-uc-plakidia-wnmg0604-uc-gia-mantemi-finirisma","title":"WNMG0604**-UC Inserts for Cast Iron - Finishing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UC)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining and finishing on cast iron. It features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for soft cast irons. Ensures very good surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~3.0 \/ 0.8 \/ YG1010","offer_id":52950505062723,"sku":"WNMG060408-UC-YG1010","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-UC_YG3115.png?v=1739970557"},{"product_id":"wnmg0604-ug-plakidia-wnmg0604-ug-gia-atsalia-synexh-koph","title":"WNMG0604**-UG Inserts for Steels - Continuous Cutting","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UG)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of steels. It features a relatively \u003cstrong\u003elarge rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) for smoother chip flow and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining and continuous cutting. Combines \u003cstrong\u003etoughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ehigh wear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3020\u003c\/em\u003e\u003c\/strong\u003e – First choice for general steel machining (P15–P30). CVD TiCN–Al₂O₃ coating. Substrate specially designed for high toughness and smooth surface for increased wear resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.20~0.40 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=160~380 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=140~320 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=60~130 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.0~3.0 \/ 0.8 \/ YG3125","offer_id":52950505259331,"sku":"WNMG060408-UG-YG3125","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-UG_YG3115.png?v=1780567370"},{"product_id":"wnmg0604-um-plakidia-wnmg0604-um-gia-atsalia-diakoptomenh","title":"WNMG0604**-UM Inserts for Steels - Interrupted Cutting","description":"\u003ch3\u003eProcessing Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UM)\u003c\/em\u003e\u003c\/strong\u003e - Geometry for general machining of steels. It has a relatively \u003cstrong\u003esmall\u003c\/strong\u003e \u003cstrong\u003erake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and a \u003cstrong\u003ereinforced cutting edge\u003c\/strong\u003e with a flat section on the edge (\u003cem\u003eT-land\u003c\/em\u003e). Suitable for medium machining and interrupted cutting. Combines \u003cstrong\u003ehigh toughness\u003c\/strong\u003e (\u003cem\u003etoughness\u003c\/em\u003e) and \u003cstrong\u003ewear resistance\u003c\/strong\u003e (\u003cem\u003ewear resistance\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3030\u003c\/em\u003e\u003c\/strong\u003e – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and balance of wear and coating chipping resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.30 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~350 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=130~280 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=70~110 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~2.5 \/ 0.4 \/ YG3020","offer_id":52950505357635,"sku":"WNMG060404-UM-YG3020","price":5.1,"currency_code":"EUR","in_stock":true},{"title":"1.0~3.0 \/ 0.8 \/ YG3020","offer_id":52950505390403,"sku":"WNMG060408-UM-YG3020","price":5.1,"currency_code":"EUR","in_stock":true},{"title":"1.0~3.0 \/ 0.8 \/ YG3030","offer_id":52950505423171,"sku":"WNMG060408-UM-YG3030","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"1.0~3.0 \/ 0.8 \/ YG3010","offer_id":52950505455939,"sku":"WNMG060408-UM-YG3010","price":5.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-UM_YG3115.png?v=1739970694"},{"product_id":"wnmg0604-uf-plakidia-wnmg0604-uf-gia-atsalia-finirisma","title":"WNMG0604**-UF Inserts for Steels - Finishing","description":"\u003ch3\u003eWorkpiece Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P)\u003c\/em\u003e\u003c\/strong\u003e - Steels - Alloy Steels (Steel - Alloy Steel)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(UF)\u003c\/em\u003e\u003c\/strong\u003e - Geometry specially designed for finishing in steels. It features a \u003cstrong\u003esmall rake angle\u003c\/strong\u003e (\u003cem\u003erake angle\u003c\/em\u003e) and is available with \u003cstrong\u003esmall cutting radii\u003c\/strong\u003e (\u003cem\u003eRE\u003c\/em\u003e). Suitable for small cutting depths (\u003cem\u003eAp\u003c\/em\u003e) and low feeds (\u003cem\u003eFn\u003c\/em\u003e). Ensures excellent surface quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG3115\u003c\/em\u003e\u003c\/strong\u003e – New grade for high cutting speeds in steels (P15–P25). CVD MT-TiCN–Al₂O₃ coating. Ideal for mass production with stable tool life and minimization of built-up edge formation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.05~0.25 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P1-5)\u003c\/em\u003e\u003c\/strong\u003e - Vc=180~500 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P5-9)\u003c\/em\u003e\u003c\/strong\u003e - Vc=170~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(P10-11)\u003c\/em\u003e\u003c\/strong\u003e - Vc=60~300 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the chip, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum performance and tool life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"0.5~2.0 \/ 0.4 \/ YG3115","offer_id":52950505095491,"sku":"WNMG060404-UF-YG3115","price":6.0,"currency_code":"EUR","in_stock":true},{"title":"0.5~2.0 \/ 0.4 \/ YG3020","offer_id":52950505128259,"sku":"WNMG060404-UF-YG3020","price":5.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-UF_YG3115.png?v=1739970826"},{"product_id":"wnma0604-plakidia-wnma0604-gia-mantemi-baries-kopes-kai","title":"WNMA0604** Inserts for Cast Iron - Heavy Cuts and Roughing","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K)\u003c\/em\u003e\u003c\/strong\u003e - Cast Irons - Grey Cast Iron (Cast Iron)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChipbreaker\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(..MA)\u003c\/em\u003e\u003c\/strong\u003e - Designed for machining brittle materials such as cast irons and coated steels. It has no geometry on the cutting edge. Suitable for heavy roughing **\u003cem\u003e\u003cem\u003e(\u003c\/em\u003eroughing\u003c\/em\u003e) in cast irons and light machining in coated steels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGrade\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eYG1010\u003c\/em\u003e\u003c\/strong\u003e – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003eFn\u003c\/em\u003e\u003c\/strong\u003e = 0.15~0.50 mm\/rev\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCutting Speed\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K15-16)\u003c\/em\u003e\u003c\/strong\u003e - Vc=300~450 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(K17-18)\u003c\/em\u003e\u003c\/strong\u003e - Vc=120~350 m\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTurning inserts from YG1\u003c\/strong\u003e, a top cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echipbreaker\u003c\/strong\u003e, i.e., the geometry that helps in breaking and removing the chip, as well as the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Yg","offers":[{"title":"1.5~3.0 \/ 1.2 \/ YG1010","offer_id":52950501753155,"sku":"WNMA060412-YG1010","price":6.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMA080408.png?v=1739970869"},{"product_id":"wnmg0604-hs-plakidia-wnmg0604-hs-gia-yperkrammata","title":"WNMG0604**-HS Inserts for Superalloys","description":"\u003ch3\u003eMachining Materials\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cem\u003e(S)\u003c\/em\u003e\u003c\/strong\u003e - Heat Resistant Superalloys (Fe,Ni,Co) - Titanium Alloys (HRSA, Titanium alloys)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eLathe inserts from Korloy\u003c\/strong\u003e, a leading cutting tool manufacturer from Korea.\nThe choice of the appropriate insert depends on the \u003cstrong\u003echip breaker\u003c\/strong\u003e, that is the geometry that helps in breaking and removing the waste, as well as on the \u003cstrong\u003egrade\u003c\/strong\u003e, which describes the microstructure and coating of the insert and directly affects hardness and brittleness. The \u003cstrong\u003ecutting conditions\u003c\/strong\u003e (speed, feed, depth) must be carefully defined to achieve maximum tool performance and life.\u003c\/p\u003e","brand":"Korloy","offers":[{"title":"06 \/ 04 \/ PC8110","offer_id":52605409362243,"sku":"WNMG060404-HS","price":4.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/files\/WNMG080408-UG.png?v=1739970593"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0572\/8396\/9077\/collections\/WN--06.jpg?v=1772785158","url":"https:\/\/organametrisis.gr\/en\/collections\/wn-06-inserts\/%cf%87%cf%81%ce%ae%cf%83%ce%b7_%ce%bc%ce%b1%ce%bd%cf%84%ce%ad%ce%bc%ce%b9.oembed","provider":"Όργανα Μέτρησης","version":"1.0","type":"link"}