Skip to content
Free shipping over €50 - Same day shipping for orders by 4:30pm
Free shipping over €50 - Same day shipping for orders by 4:30pm

PCE-FOT 10 - Oil Thermometer

by Pce
 Pce
Κωδικός Range Reading Accuracy Τιμή ** Στοκ
PCE-FOT 10 30 ... 200 °C 0.5 °C 0.2 % €275,00 Με παραγγελία


Τιμές χωρίς ΦΠΑ 24%



Temperature measurement range 30 ... 200°C / 86 ... 392°F
Temperature measurement accuracy ± 1.5°C / ± 2.7 °F
Reading 0.5° C / 0.9 °F
Oil measurement range (PC value) 0.5 ... 40% polar parts
Measurement accuracy (PC value) ± 3% (at 30 ... 90°C / 86 ... 194°F)
Reading(PC value) 0.1%
Power supply 2 x 1.5V AAA battery
Battery life About 500 measurements / 25 hours in continuous operation
Temperature sensor PTC sensor
Oil sensor Capacitive sensor
Operating temperature 0 ... 50°C / 32 ... 122 °F
Storage temperature -20 ... 70°C / -4 ... 158 °F
Screen Illuminated LCD, 3 digits
Dimensions (W x D x H) 55 x 350 x 25 mm / 2.2 x 13.8 x 1 in without sensor
Weight 185 g / < 1 lb
Material
ABS
PROTECTION
IP65 (Waterproof)
Evaluation of the results in the PCE-FOT 10 frying oil tester

Oil is new and fresh (LED flashes green) 0 ... 18.5%

Oil is in critical range (LED flashes blue). It is recommended to replace or partially renew the oil.

19 ... 24%
The oil in the fryer has run out. The set limit (factory setting 24%) has been exceeded (LED flashes red). Therefore, the oil must be replaced. > 24%

PCE-FOT 10 Frying Oil Thermometer / Cooking Oil Tester

Oil quality meter with illuminated three-digit LCD display / IP65 protection (Waterproof) / Status LED (blue, green, red) / PC value display between 0.5% and 40% / Auto power off

The frying oil thermometer / cooking oil tester PCE-FOT 10 is a measuring device with which you can determine the quality of various types of oil. This cooking oil tester is widely used by food inspectors. The thermometer takes a direct reading from hot fat, as it is possible to penetrate the sensor into the oil of a deep fryer or other appliance. Oil temperature in °C / °F and oil quality in PC percentage (the measure of thermal-oxidative stress of a frying oil) are determined within seconds. A three-color light indicator function corresponding to different oil qualities is installed in the device.

- Measurement directly on liquid fat
- Prevention of health risks
- Fast, reliable direct measurement
- Different calibrations can be stored
- Setting the correct frying point
- Accurate determination of frying oil quality
- Temperature measurement up to 200°C / 392°F
- Light indicators (green, yellow, red)
- Waterproof
- Sturdy and anti-vibration
- Several types of oils (adjustable)
- 0.5 to 40% polar parts
- Area of ​​application: frying oils
- To determine the TPM value (Total Polar Materials) of frying oil

Package contents
1 x PCE-FOT 10 Frying Oil Thermometer/Cooking Oil Tester
1 x Carrying case
1 x User Manual