WTI-G
WTI-G - Thread Repair Kit (BSP) - (Drill not included)
| Κωδικός | Diameter | TPI | Drill | Τιμή ** | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WTI-G-1/8-28 | 1/8" | 28 | 10 mm | €45,10 | 1 διαθέσιμo | ||
| WTI-G-1/4-19 | 1/4" | 19 | 13.5 mm | €45,10 | 1 διαθέσιμo | ||
| WTI-G-3/8-19 | 3/8" | 19 | 17 mm | €51,70 | 1 διαθέσιμo | ||
Τιμές χωρίς ΦΠΑ 24%
Thread repair kits are used to repair damaged or defective threads in metals, many plastics or composites.
The process of repairing the threads in a damaged hole, using a V-COIL Set, has the following steps:
- Drill out the damaged threads using an appropriately sized drill bit.
- Then create a new thread with the collet included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the part.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque from the insertion tool is released. This will make it lock onto the fixture.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar.
