Thread Repair Set American Fine Pitch 1.5D (Drill Not Included)
WTI-UNF
| Κωδικός | Diameter | TPI | Drill | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WTI-UNF-3/4-16 | 3/4" | 16 | 19.5 mm | €69,00 | 5-8 εργάσιμες | ||
| WTI-UNF-7/8-14 | 7/8" | 14 | 22.8 mm | €81,00 | 5-8 εργάσιμες | ||
| WTI-UNF-1-12 | 1" | 12 | 26 mm | €87,00 | 5-8 εργάσιμες | ||
| WTI-UNF-1-1/8-12 | 1" 1/8" | 12 | 29 mm | €245,00 | 5-8 εργάσιμες | ||
| WTI-UNF-1-1/4-12 | 1" 1/4" | 12 | 32.5 mm | €268,00 | 5-8 εργάσιμες | ||
| WTI-UNF-1-3/8-12 | 1" 3/8" | 12 | 35.5 mm | €298,00 | 5-8 εργάσιμες | ||
| WTI-UNF-1-1/2-12 | 1" 1/2" | 12 | 38.5 mm | €352,00 | 5-8 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Thread repair kits are used to fix damaged or defective threads in metals, many plastics, or composite materials.
The process of repairing threads in a damaged hole, using a V-COIL Set, involves the following steps:
- Drill out the damaged threads using a drill of the correct size.
- Then create a new thread with the tap included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the component.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque is released from the insertion tool. This will cause it to lock into the component.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar tool.
