Description

3D-Sensor Digital

Name: 3D Tester Milling Machine Zero Setter IP64
Brand: Haimer
SKU: 80.460.00.FHN
Price: 858.0 EUR
Availability: InStock

The Digital 3D-Sensor is a further development of the time-proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines.

The spindle may be positioned quickly and safely on the reference edge. The approaching operation can be exactly monitored on the digital display. The zero points can be set without any calculations because the spindle axis is positioned exactly on the approached edge.

The digital display has large numbers that measure in increments of 0.001 [mm]. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is water- and dust-proofed according to IP 64 and can be stored in the tool magazine of the machine.

Please take note: The given measuring precision of 0.005 [mm] only applies if the original HAIMER probe tips are used.

Included in delivery: 3D-Sensor Digital with clamping shank Ø 20 mm, short probe tip Ø 4 mm

Technical data subject to change without prior notice.

Probe tips

The sensors can be equipped with a short (ball Ø 4 mm) and a long (ball Ø 8 mm) probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.
The probe tips of course are compatible with all HAIMER 3D-Sensors.

Measuring Instrument 3D-Sensor Digital Technical Drawing

L1 [mm]	113
L2 [mm]	50
Ø D1 [mm]	20
Ø D2 [mm]	4
B [mm]	65
Smallest unit of measure [mm]	0,001
Repeatability [mm]	0,005
Measuring accuracy [mm]	0,005
Display mode	inch / metric
Display size [mm]	45 x 23
Height of numbers [mm]	8,5
Service life of battery approx. (continuous operation) [hrs]	3000

Order No.
80.460.00.FHN

Technical Documents

PDF

Datasheet

PDF

Catalog

IP Protection

IPXY

X = Protection against solid objects & access to hazardous parts
Y = Protection against water ingress

Value	1st Digit – Solids / Access	2nd Digit – Water
0	No protection	No protection
1	Protection against solids ≥50 mm (test probe Ø50 mm)	Vertical falling drops
2	Protection against solids ≥12.5 mm (test probe Ø12.5 mm)	Drops with tilt up to 15°
3	Protection against solids ≥2.5 mm (test probe Ø2.5 mm)	Spraying up to 60°
4	Protection against solids ≥1 mm (test probe Ø1 mm)	Splashing from all directions
5	Protection against dust (limited ingress without harmful effects)	Water jets (nozzle 6.3 mm)
6	Complete dust-tightness (dust-tight)	Powerful water jets (nozzle 12.5 mm)
7	—	Temporary immersion (usually 1 m / 30 min)
8	—	Continuous immersion (depth & time specified by manufacturer)
9 / 9K	—	High-pressure & high-temperature water jets