Insize

Pairs of matched blocks for positioning and setup Screws and wrench are included Hardness HRC 55-62

Data Hold, MAX mode Automatic shutdown Power supply: 3 x 1.5V AAA batteries Continuity alarm: <50Ω Work light Diode: Open circuit voltage 1.5V...

4000 counts LCD display 30mm jaw opening True RMS measurement NCV detection REL (zero) function Data hold Low battery indication Auto power off Sa...

Detect combustible gas (EX, including CH4, C2H6, H2, etc), oxygen (O2), carbon monoxide (CO) and hydrogen sulfide (H2S) by default, optional confi...

Measure depth of small groove and hole, also measure depth of tire tread Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Supplied wit...

Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Meet DIN862 (except 1141-50...

Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Meet DIN862 Battery CR2...

Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Battery CR2032 Data out...

Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Meet DIN862 Battery CR20...

Technical Specifications Resolution: 0.1 mm / 0.0005" Not waterproof Supplied with three interchangeable measuring tips (flat, spherical, ...

Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Meet DIN862 Battery CR2...

IP67 dust/waterproof Resolution: 0.01mm/0.0005" Button function: zero, on/off, mm/inch, ABS/REL, hold Battery CR2032 Made of stainless steel.

Impact Devices: DC (HDT-LP200-DC) C (HDT-LP200-C) D+15 (HDT-LP200-D15) DL (HDT-LP200-DL) E (HDT-LP200-E) G (HDT-LP200-G) Hardness Blocks: D (...

Counting and recording the number of mechanical movements. For presses etc. By reset to zero Number of digits: 6 Range: 0-999999

The additional cable 9501-1200-SPC allows direct recording of measurements in Excel with the press of a button.

Instrument for measuring crank deflection distortion. The balance block is placed on the back of the watch to keep the watch face up.

Supplied in pair Made of stainless steel Suitable for caliper series 1124,1526,1530,1520,1176,1178,1120,1121,1187,1129 and 1185

Measuring opening, slot width Reading: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic shutdown Battery CR2032 Made of stainless steel

/

Lenses: Diameter: 5.2 mm pixel: 0.4 M Depth of Field: 30~80 mm Angle: 72º Lighting: 8 levels Sealing Class: IP67 (Waterproof) Cable: Length: ...

Lenses: Diameter: 8 mm pixel: 0.92 M Resolution: 1280 x 720 Depth of Field: 30~80 mm Angle: 77º Lighting: 3 levels Sealing Class: IP67 (Waterpro...

Specifications: Code: 7304-2 Description: Footswitch for data transfer, cable length 2 meters Compatible Products: 7302 Series, 7305 Series ...