Insize

Square head (zinc): For positioning at 45º or 90º of the corner and the piece to be measured Accuracy: ±0.5° Riga (stainless steel): ...

Center angle: for placing the center of the cylinder diameter (Ød): 30 - 100mm Accuracy: ±0.15mm Protractor head: For positioning the bl...

Range: 0-320º Reading: 2' Accuracy: ±2' Made of stainless steel Chrome plated scale Codes: 2374-320: no position lock 2374-...

Range: 0-360º Reading: 10'' / 0.005º Accuracy: ±5' Display in degrees (eg 32.655°) and degrees/minutes/seconds (eg 32°39'30") SET button:...

Range: 0 - 360º Degree reading: 0.1º Accuracy: ±0.3º Buttons: on/off, zero With clamping screw, which locks the position of the blades ...

Range: 0 - 360º Reading: 0.05º Accuracy: ±0.15º Buttons: on/off, hold, zero, ABS (absolute and differential measurement) Possibility of l...

For individual pin gauges ( 4110, 4118, 4192 and 4193 series)

Application two-axis Scale input ports 2 Resolution: 0.05μm, 0.1μm, 0.2μm, 0.5μm, 1μm, 2μm, 5μm, 10μm, 20μm, 50μm.

Quick hole diameter measurement Hardened steel, HRC 50-58 Satin chrome plated surface Aluminum handle

They measure the opening, slot width, hole diameter, etc Rear diameter correction table (only for 4833-1, 4833-2) Made of stainless steel

Diameter correction table on the taper gage back Made of stainless steel

4 pcs included (1-8mm, 8-15mm, 15-22mm, 22-29mm) They measure the opening, slot width, hole diameter, etc Diameter correction table on the back...

Check the flatness and parallelism of measuring faces of micrometer.

Travel: 60mm Range: 500N / 50kg Weight: 9kg Dimensions: 450 x 185 x 170 mm For tensile testing only

Parallelism between top and bottom: 5μm Height difference of a matched pair: 5μm Hardened to HRC55-60.

Parallelism between top and bottom: 5μm Height difference of a matched pair: 5μm Hardened to HRC55-60.

Parallelism between top and bottom: 5μm Height difference of a matched pair: 5 μm Made of alloy tool steel Hardened to HRC55-60