PCE-RVI 2 - Digital Viscometer
| Measurement range | 15 ... 100,000 cP, 1 ... 100,000 cP with L0 axis configuration |
| Accuracy |
<±2 % of measuring range |
| Reading | 0.01 cP |
| Repeatability | ±0.5% |
| Temperature sensor | temperature sensor resistance |
| Temperature measurement range | 0 ... 100 °C / 32 ... 212 °F |
| Temperature measurement accuracy | 0.1 °C |
| Adjustable measurement time | 30 seconds ... 1 hour or endless |
| Reading measurement time | 30 seconds |
| Adjustable speed | 6, 12, 30, 60 rpm |
|
Sample volume |
250 ... 400 ml / 8.4 ... 13.5 fl oz (depending on axle) |
| Axis | L1 ... L4 |
| Connectivity | RS232 (SUB D9) |
| Height adjustable | 25cm / 9.8" |
| Power supply | main: 100 ... 240 V AC, 50 / 60 Hz |
| secondary 12 V DC, 2 A | |
| Environmental conditions | 5 ... 35 °C / 41 ... 95 °F, <80 RH, non-condensing |
| Dimensions | 400 x 200 x 430 mm / 15.7 x 7.8 x 16.9" |
| Weight | 4.8 kg/ 10.5 lbs |
Viscometer with LC display / Network operation / Sample volume 250 ... 400 ml /
Measuring range 15 ... 100,000 cP / Adjustable rotation speed /
Simple operation / Spindle set L1 ... L4 included in delivery
Measuring range 15 ... 100,000 cP / Adjustable rotation speed /
Simple operation / Spindle set L1 ... L4 included in delivery
With an accuracy of <±2% and a measuring range of 15 ... 100,000 cP, the viscometer is a precise measuring device for determining the viscosity of a liquid sample. Viscosity is determined by the viscometer based on an applied mechanical resistance acting in the opposite direction to the rotational movement of a spindle. The viscometer can be operated at an adjustable speed between 6… 60 RPM.
Many fluids are exposed to thermal stress and therefore their viscosity changes, such as motor oils. This is exactly where the viscometer comes in. With the immersion temperature sensor, the temperature of a sample can be determined during measurement between 0 … 100 °C. The viscometer can be connected to a computer via the RS232 output in order to analyze the measurements. Optional software can then be used to generate a temperature and viscosity curve during a measurement.
The viscometer can be aligned by adjusting its feet so that the measurement axis is always perpendicular to the medium to be measured. To check alignment, the viscometer has a proper alignment indicator. At the same time, the height of the sample container can be adjusted with a maximum displacement of a total of 25 cm from the viscometer in order to position the shaft correctly.
Many fluids are exposed to thermal stress and therefore their viscosity changes, such as motor oils. This is exactly where the viscometer comes in. With the immersion temperature sensor, the temperature of a sample can be determined during measurement between 0 … 100 °C. The viscometer can be connected to a computer via the RS232 output in order to analyze the measurements. Optional software can then be used to generate a temperature and viscosity curve during a measurement.
The viscometer can be aligned by adjusting its feet so that the measurement axis is always perpendicular to the medium to be measured. To check alignment, the viscometer has a proper alignment indicator. At the same time, the height of the sample container can be adjusted with a maximum displacement of a total of 25 cm from the viscometer in order to position the shaft correctly.
- Spindle set consisting of L1, L2, L3, L4
- Measurement accuracy <±2% of the measurement range
- Temperature measurement
- Built-in bubble level for leveling
- Optionally with analysis software
- Network mode
Package contents
1 x Viscometer PCE-RVI 2
1 x Spindle set consisting of axis L1 ... L4
1 x Carrying case
1 x Double Open Key
1 x Power Adapter
1 x Instruction Manual
1 x Spindle set consisting of axis L1 ... L4
1 x Carrying case
1 x Double Open Key
1 x Power Adapter
1 x Instruction Manual
