WNMG0604**-UF Inserts for Steels - Finishing
P
WNMG0604**-UF
| Κωδικός | Cutting Depth (mm) | Radius (mm) | Grade | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WNMG060404-UF-YG3115 | 0.5~2.0 | 0.4 | YG3115 | €5,00 | 5-8 εργάσιμες | ||
| WNMG060404-UF-YG3020 | 0.5~2.0 | 0.4 | YG3020 | €4,30 | 9 διαθέσιμα | ||
Τιμές χωρίς ΦΠΑ 24%
Workpiece Materials
- (P) - Steels - Alloy Steels (Steel - Alloy Steel)
Chipbreaker
- (UF) - Geometry specially designed for finishing in steels. It features a small rake angle (rake angle) and is available with small cutting radii (RE). Suitable for small cutting depths (Ap) and low feeds (Fn). Ensures excellent surface quality.
Grade
- YG3115 – New grade for high cutting speeds in steels (P15–P25). CVD MT-TiCN–Al₂O₃ coating. Ideal for mass production with stable tool life and minimization of built-up edge formation.
Feed
- Fn = 0.05~0.25 mm/rev
Cutting Speed
- (P1-5) - Vc=180~500 m/min
- (P5-9) - Vc=170~450 m/min
- (P10-11) - Vc=60~300 m/min
Turning inserts from YG1, a leading cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the chipbreaker, that is the geometry that helps in breaking and removing the chip, as well as on the grade, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The cutting conditions (speed, feed, depth) must be carefully set to achieve maximum performance and tool life.
