WNMG0804**-UG Inserts for Steels - Continuous Cutting
P
WNMG0804**-UG
| Κωδικός | Cutting Depth (mm) | Radius (mm) | Grade | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WNMG080404-UG-YG3125 | 0.5~3.0 | 0.4 | YG3125 | €5,90 | 10 διαθέσιμα | ||
| WNMG080408-UG-YG3125 | 1.0~3.0 | 0.8 | YG3125 | €5,90 | 9 διαθέσιμα | ||
| WNMG080408-UG-YG3020 | 1.0~3.0 | 0.8 | YG3020 | €5,00 | 1 διαθέσιμo | ||
| WNMG080412-UG-YG3125 | 1.5~3.0 | 1.2 | YG3125 | €5,90 | 5-8 εργάσιμες | ||
| WNMG080416-UG-YG3125 | 2.0~4.0 | 1.6 | YG3125 | €5,90 | 5-8 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Machining Materials
- (P) - Steels - Alloy Steels
Chipbreaker
- (UG) - Geometry for general machining of steels. It features a relatively large rake angle for smoother chip flow and a reinforced cutting edge with a flat section on the edge (T-land). Suitable for medium machining and continuous cutting. Combines toughness and high wear resistance
Grade
- YG3020 – First choice for general steel machining (P15–P30). CVD TiCN–Al₂O₃ coating. Substrate specially designed for high toughness and smooth surface for increased wear resistance.
Feed
- Fn = 0.20~0.40 mm/rev
Cutting Speed
- (P1-5) - Vc=160~380 m/min
- (P5-9) - Vc=140~320 m/min
- (P10-11) - Vc=60~130 m/min
Turning inserts from YG1, a top cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the chipbreaker, i.e., the geometry that helps break and remove the chip, as well as the grade, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The cutting conditions (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.
