For drilling stainless steel or "inox" as it is sometimes called, a cobalt drill bit or a carbide drill bit is recommended. These types of drill bits are made from high-speed steel coated with cobalt or tungsten carbide, which are more durable and suitable for drilling harder materials. Cobalt drill bits have higher heat resistance, making them ideal for drilling stainless steel, and carbide drill bits have a harder and more wear-resistant material, making them ideal for drilling abrasive materials such as stainless steel.
It is also important to use cutting fluid or lubricant when drilling stainless steel to prevent excessive heat buildup and reduce the risk of the drill bit breaking or the material being damaged. Additionally, slow speeds and high-pressure cutting are recommended to avoid material hardening and ensure a clean, precise hole.
What characteristics should a drill bit have to cut stainless steel? The following criteria must be met to achieve a good drilling result.
Stainless steel is a very hard material and therefore difficult to cut. Therefore, the drill bit should be made from HSSE-Co 5 (5% cobalt content), HSSE-Co 8 (8% cobalt content), or even better solid carbide. In contrast, an HSS drill bit, which is very soft, will overheat immediately.
Tip Angle
The tip angle is located at the head of the drill bit. For hard materials such as stainless steel, the tip angle should be large, e.g., 130° or 135°. For soft materials, the usual angle is 118°. With a large angle, a greater part of the cutting edge engages with the workpiece during drilling. This also means that more force is applied to the workpiece and higher contact pressure (high feed) is required.
Helix Angle
The helix angle determines the chip formation process. Small spiral angles are used for hard materials. Therefore, the helix angle should be small, between 20-40°. The helix angle and tip angle are the determining factors for application on hard or soft materials.
Coating
The TiAlN coating, because it has high heat resistance, is recommended for cutting stainless steel.
Technical Specifications:
- Cobalt HSSCo - High Speed Steel Cobalt
- Short
- Tip 135º
- Helix 40º
- Cylindrical Shank
- TiALN Coating
Applications:
Cobalt drill bit with TiALN coating specially for stainless steels INOX.
Factory HEPYC
The HEPYC Cutting Tools, headquartered in Spain, has been operating for over 70 years as a manufacturer of specialized cutting tools, from taps and drills to milling and cutting operations. Its products include standard and special drills, suitable for cutters in hard materials, end-mills, and an extensive range of threading tools (threading taps/dies) for various materials such as steel, stainless steel, aluminum, copper, etc.
Official Representation
Our company, ΤΡΙΑΝΤΑΦΥΛΛΟΥ Κ ΣΙΑ Ε.Ε. is the official representative of HEPYC in Greece since 2018 and we can support the entire range of its catalog, which includes more than 15,000 different product codes.
| SKU | D1(mm) | L1(mm) | L2(mm) | Availability |
Price
+VAT
|
Cart
Quote
|
|---|---|---|---|---|---|---|
| D-INOX-1 | 1 | 34 | 12 | 3 available |
+VAT
€4,20
|
|
| D-INOX-1.25 | 1.25 | 38 | 16 | 1 available |
+VAT
€5,00
|
|
| D-INOX-1.5 | 1.5 | 40 | 18 | 5 available |
+VAT
€4,00
|
|
| D-INOX-2 | 2 | 49 | 24 | 4 available |
+VAT
€4,00
|
|
| D-INOX-2.25 | 2.25 | 53 | 27 | 1 available |
+VAT
€4,90
|
|
| D-INOX-2.5 | 2.5 | 57 | 30 | 5 available |
+VAT
€4,00
|
|
| D-INOX-2.75 | 2.75 | 61 | 33 | 1 available |
+VAT
€6,20
|
|
| D-INOX-3 | 3 | 61 | 33 | 6 available |
+VAT
€4,40
|
|
| D-INOX-3.1 | 3.1 | 65 | 36 | 5-8 business days |
+VAT
€4,80
|
|
| D-INOX-3.2 | 3.2 | 65 | 36 | 10 available |
+VAT
€4,80
|
|
| D-INOX-3.25 | 3.25 | 65 | 36 | 5-8 business days |
+VAT
€4,90
|
|
| D-INOX-3.3 | 3.3 | 65 | 36 | 4 available |
+VAT
€6,10
|
|
| D-INOX-3.4 | 3.4 | 70 | 39 | 5-8 business days |
+VAT
€6,20
|
|
| D-INOX-3.5 | 3.5 | 70 | 39 | 3 available |
+VAT
€4,80
|
|
| D-INOX-3.75 | 3.75 | 70 | 39 | 5-8 business days |
+VAT
€5,70
|
|
| D-INOX-4 | 4 | 75 | 43 | 5 available |
+VAT
€5,50
|
|
| D-INOX-4.1 | 4.1 | 75 | 43 | 5-8 business days |
+VAT
€6,80
|
|
| D-INOX-4.2 | 4.2 | 75 | 43 | 3 available |
+VAT
€6,80
|
|
| D-INOX-4.25 | 4.25 | 75 | 43 | 5-8 business days |
+VAT
€6,40
|
|
| D-INOX-4.5 | 4.5 | 80 | 47 | 2 available |
+VAT
€6,40
|
|
| D-INOX-4.75 | 4.75 | 80 | 47 | 5-8 business days |
+VAT
€6,30
|
|
| D-INOX-5 | 5 | 86 | 52 | 7 available |
+VAT
€6,70
|
|
| D-INOX-5.1 | 5.1 | 86 | 52 | 5-8 business days |
+VAT
€8,50
|
|
| D-INOX-5.2 | 5.2 | 86 | 52 | 2 available |
+VAT
€7,60
|
|
| D-INOX-5.25 | 5.25 | 86 | 52 | 5-8 business days |
+VAT
€8,30
|
|
| D-INOX-5.5 | 5.5 | 93 | 57 | 5-8 business days |
+VAT
€8,10
|
|
| D-INOX-5.75 | 5.75 | 93 | 57 | 1 available |
+VAT
€9,20
|
|
| D-INOX-6 | 6 | 93 | 57 | 5 available |
+VAT
€9,00
|
|
| D-INOX-6.25 | 6.25 | 101 | 63 | 1 available |
+VAT
€9,50
|
|
| D-INOX-6.5 | 6.5 | 101 | 63 | 2 available |
+VAT
€10,70
|
|
| D-INOX-6.75 | 6.75 | 109 | 69 | 1 available |
+VAT
€11,30
|
|
| D-INOX-7 | 7 | 109 | 69 | 5-8 business days |
+VAT
€12,50
|
|
| D-INOX-7.25 | 7.25 | 109 | 69 | 5-8 business days |
+VAT
€14,40
|
|
| D-INOX-7.5 | 7.5 | 109 | 69 | 5 available |
+VAT
€14,20
|
|
| D-INOX-8 | 8 | 117 | 75 | 2 available |
+VAT
€15,40
|
|
| D-INOX-8.25 | 8.25 | 117 | 75 | 5-8 business days |
+VAT
€16,60
|
|
| D-INOX-8.5 | 8.5 | 117 | 75 | 2 available |
+VAT
€18,60
|
|
| D-INOX-9 | 9 | 125 | 81 | 1 available |
+VAT
€20,10
|
|
| D-INOX-9.5 | 9.5 | 125 | 81 | 1 available |
+VAT
€22,80
|
|
| D-INOX-10 | 10 | 133 | 87 | 5 available |
+VAT
€25,00
|
|
| D-INOX-10.25 | 10.25 | 133 | 87 | 5-8 business days |
+VAT
€34,90
|
|
| D-INOX-10.5 | 10.5 | 133 | 87 | 1 available |
+VAT
€29,70
|
|
| D-INOX-11 | 11 | 142 | 94 | 2 available |
+VAT
€31,70
|
|
| D-INOX-11.5 | 11.5 | 142 | 94 | 1 available |
+VAT
€37,10
|
|
| D-INOX-12 | 12 | 151 | 101 | 1 available |
+VAT
€37,10
|
|
| D-INOX-12.5 | 12.5 | 151 | 101 | 1 available |
+VAT
€46,50
|
|
| D-INOX-13 | 13 | 151 | 101 | 1 available |
+VAT
€46,50
|
Added to cart!
Mineral Coolant Cutting Oil (for conventional machines)
Conventional water-soluble cutting oil (soap oil) with very high mineral oil content. Its main feature is that it forms a rich emulsion. Provides ...
View full details