Viscosity Meter - Flow Cup Viscometer
PCE-127/4
| Technical specifications | |
| Capacity | 100 ml |
| Nozzle diameter | 4 mm (± 0.02 mm) |
| Standard | DIN 53211 |
| Flow time | 25 ... 150 |
| Measurement range | 96.2 ... 680 (mPA * s) |
| Material |
cup: made of anodized aluminum nozzle: made of stainless steel |
|
Dimensions 127/4 |
Ø internal 50 mm Ø external 85 mm height 70 mm |
| Weight | approximately 200 g |
Flow cup viscometer for viscosity measurement / German standard DIN 53211 /
Cup made of anodized aluminum / Also available as immersion cup
Cup made of anodized aluminum / Also available as immersion cup
Flow cup viscometers are viscosity meters for determining the viscosity of liquids. Flow cups are often used in industry and research laboratories. Due to the nature of the measurement method, however, determination is only performed on low-viscosity liquids, as the liquid cannot flow from the nozzles if the viscosities are too high. Therefore, viscosity measurements for liquids with Newtonian behavior provide the most accurate results in the flow cup. Viscosity can be determined based on the flow volume and the measured time it takes for the liquid to pass through the nozzle. The user starts timing when the liquid begins to flow at the lower end of the nozzle. It is stopped as soon as the flow is no longer uniform. After completing the measurement, it is imperative to clean the flow cup, as dried residues can distort the next measurement result. It should also be ensured that no pointed or sharp tools are used for cleaning. Scratches on the flow cup viscometer affect the result.
- Material: anodized aluminum
- Factory calibration certificate included
- With overflow channel
- Meets international standards
Package contents
1 x PCE-127/4 Flow Cup viscometer
1 x Glass plate
1 x Factory certificate
1 x Instruction manual
Note: The test stand is not included.
1 x Glass plate
1 x Factory certificate
1 x Instruction manual
Note: The test stand is not included.
