PCE-TTC 30 - Thermocouple Calibrator
by Pce
Κωδικός | Τιμή ** | Στοκ | |
---|---|---|---|
PCE-TTC 30 | €1.054,00 | Με παραγγελία |
Τιμές χωρίς ΦΠΑ 24%
DC voltage | |||
Measurement range | Reading | Accuracy | |
0 ... 30V | 0.001V | ± 0.02% of reading + 2 Dgt | |
Current DC mA | |||
Measurement range | Reading | Accuracy | |
0 ... 24-mA | 0.001-mA | ± 0.02% of reading + 2 Dgt | |
Measurement / Simulation | |||
Thermocouples |
Measurement range
|
Reading
|
Accuracy
|
E |
-200 ... 1000°C / -328 ... 2192°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
J |
-200 ... 1200°C / -328 ... 2192°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
K |
-200 ... 1372°C / -328 ... 2501°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
T |
-200 ... 400°C / -328 ... 752°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
B |
450 ... 1800°C / 842 ... 3272°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
R |
0 ... 1750°C / 32 ... 3182°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
S |
0 ... 1750°C / 32 ... 3182°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
N |
-200 ... 1300°C / -328 ... 2372°F
|
0.1°C / 0.18°F
|
± 0.3°C / 0.54°F
|
mV |
-10 ... 80 mV
|
0.001 mV
|
± 0.02% of reading + 2μV |
-10 ... 250 mV
|
0.01 mV
|
± 0.02% of reading + 0.02 mV | |
Note: Specifications refer to the ITS-90 temperature standard | |||
General characteristics | |||
Screen measurements |
Measurement: mA / V / thermocouple / mV Simulation: thermocouple / mV |
||
Temperature units | °C / °F / K | ||
Cold junction compensation error | ≤ ± 0.5°C / 0.9°F | ||
Maximum input voltage | 30V DC | ||
Temperature coefficient | <30ppm | ||
Input impedance measurement |
Thermocouple / mV / V:> 1 MΩ Current measurement: 10 Ω |
||
Response time | <100 ms | ||
Resistance | > 4.7 kΩ with thermocouple / mV | ||
Count refresh rate | 10 Hz | ||
Isolation | 500V DC | ||
Data storage | Internal memory 150000 readings | ||
Exit | USB 2.0 | ||
Screen |
2.4" TFT LCD 240 x 320 pixels Illuminated LEDs |
||
Output voltage current loop | 24V DC / 24mA | ||
HART mA loop resistance | 250 Ω ± 20% | ||
Special characteristics |
Step and ramp function Automatic and manual function √x, x2: For the measurement function |
||
Continuity test | Adjustable limit up to 100 Ω | ||
Power supply | Li-ion battery 3.7 V / 2300 mAh | ||
Charging time | ~5 hours | ||
Current transformer |
Input: 100 ... 240V AC / 50/60 Hz Output: 5V / 1A DC |
||
Battery life |
About 15 hours: Simulation and measurement with low LCD light About 8 hours: Measuring with low LCD light |
||
Dimensions | 162 x 82 x 40 mm | ||
Weight | ~300g / < 1lb | ||
Degree of protection | IP20 | ||
Operating conditions | Battery mode: 0 ... 55°C / 32 ... 131°F, 30 ... 90% RH Main mode: 0 ... 45°C / 32 ... 113 °F, 30 ... 90 % RH | ||
Storage conditions | -20 .. 60°C / -4 ... 140°F, 30 ... 90% RH non-condensing | ||
Heating time | ~15 minutes |
PCE-TTC 30 Thermocouple Calibrator
current and voltage / Li-ion battery / Continuity tester / Ramp function
current and voltage / Li-ion battery / Continuity tester / Ramp function
The PCE-TTC 30 thermocouple calibrator can be used to calibrate thermocouples, including the popular K, T, S. The device has an accuracy of 0.3°C / 0.54°F, making the calibration quite reliable.
In addition to direct temperature specifications or ultra-low voltages down to 250 mV, the thermocouple calibrator features a temperature ramp function where the user can select ramp temperatures and isothermal dwell times. Via a micro USB port, the calibrator is charged and data is transferred to a computer for further processing and analysis.
- Battery operation
- For thermocouples E, J, K, T, B, R, S, N, mV
- 24 V power supply for current loops
- Compatible with HART
- Manual mode & ramp mode
- Continuity check
- Data logger
- For thermocouples E, J, K, T, B, R, S, N, mV
- 24 V power supply for current loops
- Compatible with HART
- Manual mode & ramp mode
- Continuity check
- Data logger
Package contents
1 x Thermocouple Calibrator PCE-TTC 30
2 x Cables with 2 mm plug
1 x Thermocouple adapter to 2 mm plug
2 x Adapter 2mm to 4mm cable
2 x Crocodile tweezers
1 x Mini USB cable
1 x Power supply 5 V / 1 A
1 x Carrying case
1 x Software
1 x User Manual
2 x Cables with 2 mm plug
1 x Thermocouple adapter to 2 mm plug
2 x Adapter 2mm to 4mm cable
2 x Crocodile tweezers
1 x Mini USB cable
1 x Power supply 5 V / 1 A
1 x Carrying case
1 x Software
1 x User Manual