WTI-UNC
1.5D American Thread Repair Kit ( Drill not included)
| Κωδικός | Diameter | TPI | Drill (Not included) | Τιμή ** | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WTI-UNC-3/4-10 | 3/4" | 10 | 19.75 mm | €56,20 | 2-5 εργάσιμες | ||
| WTI-UNC-7/8-9 | 7/8" | 9 | 23 mm | €68,00 | 2-5 εργάσιμες | ||
| WTI-UNC-1-8 | 1" | 8 | 26.25 mm | €65,00 | 2-5 εργάσιμες | ||
| WTI-UNC-1-1/8-7 | 1" 1/8" | 7 | 29.5 mm | €239,00 | 2-5 εργάσιμες | ||
| WTI-UNC-1-1/4-7 | 1" 1/4" | 7 | 33 mm | €264,00 | 2-5 εργάσιμες | ||
| WTI-UNC-1-3/8-6 | 1" 3/8" | 6 | 36 mm | €297,00 | 2-5 εργάσιμες | ||
| WTI-UNC-1-1/2-6 | 1" 1/2" | 6 | 39 mm | €354,00 | 2-5 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Thread repair kits are used to repair damaged or defective threads in metals, many plastics or composites.
The process of repairing the threads in a damaged hole, using a V-COIL Set, has the following steps:
- Drill out the damaged threads using an appropriately sized drill bit.
- Then create a new thread with the collet included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the part.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque from the insertion tool is released. This will make it lock onto the fixture.
-
BaerCoil thread inserts can be shortened to the required length with a side cutter or similar.
