Μετάβαση στο περιεχόμενο
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ
NEOSQ300 - Μαγνήτης Aνύψωσης Χαλύβων, Μετάλλων

NEOSQ300 - Μαγνήτης Aνύψωσης Χαλύβων, Μετάλλων

από Walmag
Walmag
Κωδικός Ισχύς Τιμή ** Στοκ
NEOSQ300 1350 kg Ζητήστε Προσφορά Με παραγγελία
NEOSQ600 2500 kg Ζητήστε Προσφορά Με παραγγελία
NEOSQ1000 3600 kg Ζητήστε Προσφορά Με παραγγελία
NEOSQ4000 5000 kg Ζητήστε Προσφορά Με παραγγελία


Τιμές χωρίς ΦΠΑ 24%


When to choose a Neo EP electropermanent lifting magnet:

Neo EP electropermanent lifting magnets are suitable for frequent and repeated workpiece handling and lifting – electrical control of the magnet requires no physical exertion, which is why it saves manpower and enhances work efficiency.

Advantages:

  • Control of the magnet without any physical exertion. Thanks to the optional remote control, it is also possible to control it, e.g. from a crane cabin
  • High-quality, stainless steel recessed buttons
  • Quick activation of the magnet with an electrical impulse in 0.8 seconds
  • Magnetic module in a monoblock design
  • Easy connection to the electrical power supply
  • Electrical connection is only necessary for switching the magnet ON and OFF Suitable for continuous operation; it does not need a backup battery
  • Standard Input voltage 400V, 230V version on request (300 and 600 kg capacities)
  • Stable housing with a forged lifting eye
  • Optional integration into automated operation

Detailed description:

Neo EP electropermanent lifting magnets are a professional solution to frequent handling. It does not require much effort to install. You can easily connect it to the ordinary power supply using the supplied power cable. After electric activation, the load is held by permanent lifting magnets, without the need of subsequent power supply. Electric control with buttons allows the operator to activate the device without physical effort. Due to the optional remote control, this is also possible in locations with poor accessibility.

Neo EP can be controlled from the ground or from the crane cabin. The magnet strength control can be integrated as an optional function. This is convenient for lifting individual sheet metals.

Important parameters:

  • Application: Lifting
  • Technology: Electropermanent
  • Nominal lifting capacity for flat material: up to 4000 kg
  • Temperature: max. 80 °C
  • Duty cycle: 100 %
  • Safety factor: 3:1

Typical use:

  • NEOSQ300 - handling smaller parts from mass production, blanks, forgings, castings
  • NEOSQ600 - handling longer parts and profiled sections (steel strips, rails, tubes, beams, and rods) for subsequent material cutting by saw, e.g. in metallurgical warehouses.
  • NEOSQ1000 - handling thicker sheets, burn parts, tools, and cuts. Suitable for large tables, where it is difficult to use e.g. Neo series permanent magnets.
  • NEOSQ4000 - handling large parts during plasma cutting. The control panel is shifted to the edge for comfortable removal of the magnet from the machine table.

Scope of supply:

  • Magnet
  • Certificate
  • Power supply cable
  • Instructions for use

Neo EP drawing

Parameters

Model W (mm) L (mm) H (mm) Number of poles Pole structure Breakaway force (kN) Clamping surface (mm) Weight (kg)
NEOSQ300 164 164 420 4 50 x 50 116 x 116 23
NEOSQ600 95 420 450 6 50 x 50 52 x 372 31
NEOSQ1000 228 228 295 4 80 x 80 172 x 172 39
NEOSQ4000 228 783 295 16 80 x 80 172 x 724 132