Skip to content
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ
2102231624 - Δωρεάν μεταφορικά άνω 50€

Inch Hand Taps

Product Characteristics
Υλικό
HSS
HSS
Σπείρωμα
NPT - Σωλήνος Αμερικ.
NPT - Σωλήνος Αμερικ.
Κολαουζο Ιντσας NPT Αμερικάνικο Κωνικό Σωλήνος Χειρός (Σετ) Hepyc
TH-NPT
P
●
M
●
K
●
N
●
S
●
H
●
P
Steel
M
Stainless steel
K
Grey cast iron, malleable and spheroidal iron
N
Aluminium and other non-ferrous metal
S
Special, super and titanium alloys
H
Hardened steel and chilled cast iron
● = Optimal     ○ = Secondary

Hand Tap Set NPT-American Pipe Thread Inch (Tapered)

€21,40 - €383,00
€21,40 - €383,00
€21,40 - €383,00
€21,40
HSSNPT - Σωλήνος Αμερικ.
Available

Inch hand taps are cutting tools used to produce internal threads to inch standards (UNC/UNF/BSW) by removing material inside a pre-drilled hole. They are driven with a tap wrench to keep alignment and control cutting torque.

Available as 2- or 3-piece sets (taper/second/plug or bottoming) for progressive cutting and lower torque, in multiple diameters, pitches and lengths. Options include HSS and HSS-E, straight-flute designs, from Baer, Yg & Hepyc.

Well suited for maintenance, machine shops and fabrication where inch fastener compatibility is required. Choose based on material, pitch and the correct tap drill size.

Related Collections

Μανέλες για Κολαούζα

Tap Wrenches

7 products
Κολαούζα Ίντσας Μηχανής

Machine Taps Inch

23 products
Κολαουζα Μετρικα Χειρός

Metric Hand Taps

13 products
Κολαουζα Μετρικα Μηχανής

Machine Taps Metric

31 products
Σετ Κολαουζα Μηχανής

Tap & Die Sets

13 products
Σπειρομετρα - Thread Pitch Gage

Thread Gauges

7 products
Σετ Επιδιόρθωσης Σπειρωμάτων Ιντσες

Thread Repair Set Inches

14 products
Tap Wrench
Wiki

Tap Wrench

Tap taps are precision cutting tools used to create an internal thread in a hole (e.g. in nuts or holes in metal). This process is called tapping and requires the use of a special tap wrench or machine (drill/CNC).

  • Main Categories:Hand (3-piece set): Consists of the taper (conical), the intermediate and the bottoming tap. They are used sequentially to distribute the cutting load and ensure perpendicularity.Machine: Designed for a single pass. They are divided into Spiral Point (push the chip forward - for through holes) and Spiral Flute (pull the chip out - for blind holes).
  • Materials & Coatings: Usually made from HSS or HSS-E (Cobalt) for higher resistance to heat. They often have a TiN (gold color) coating to reduce friction.
  • Important Rule: Before use, the appropriate hole must be drilled. The general formula for metric threads is:$D_{hole} = D_{nominal} - P$(Where $D$ is the diameter and $P$ is the thread pitch).
Read More