PCE-VDL 24I - vibration meter - Datalogger
| 3-axis accelerometer variable | |
| Measurement range | ±16 g |
| Accuracy | ±0.24g |
| Sampling/storage rate | 1600 Hz / 1 Hz |
| General Technical Characteristics of the Meter | |
|
Memory |
2.5 million measured values per measurement, 3.2 billion measured values with the internal 32 GB microSD memory card |
|
Buttons |
Start / stop a measurement, Data logger on or off switch |
|
LED activation |
Registry: operating status |
|
Power supply |
Built-in Li-Ion 3.7 V / 500 mAh battery |
|
Built-in sensors |
3-axis acceleration |
|
Exit |
USB |
|
PC software |
Free installation and evaluation software (Windows XP / Vista / 7/8/10 32-bit / 64-bit) to record and evaluate data. |
|
Operating conditions |
Temperature -20 ... +65 °C |
|
Storage conditions |
Temperature +5 ... +45 °C (ideal |
|
Standards |
The PCE-VDL 24I complies with the EU RoHS / WEEE directive |
|
Weight |
about 60 g |
|
Dimensions (L x W x H) |
87 x 44 x 23 mm |
with up to 1600 Hz
The vibration meters of the PCE-VDL series are available in two versions. The PCE-VDL 16I vibration meter contains sensors for the following parameters: temperature, humidity, air pressure, light and 3-axis acceleration. The PCE-VDL 24I has sensors for 3-axis acceleration and the maximum sampling rate of the acceleration sensor is 1600 Hz.
The meter is therefore ideal for fault diagnosis, stress testing, machine inspection, vibration measurements and general machine preventive maintenance.
| 3 Axes acceleration | |
| Measuring range | ±16 g |
| Accuracy | 0.24g |
| Resolution | 0.00390625 g |
| Max. Sampling rate | 1600 Hz |
with up to 1600 Hz
The accelerometers of the PCE-VDL series are available in two versions. The accelerometer PCE-VDL 16I contains sensors for the following physical units: temperature, humidity, air pressure, light and 3-axis acceleration. The PCE-VDL 24I has 3-axis acceleration and the max. sampling rate of the acceleration sensor is 1600 Hz.
With the accelerometer PCE-VDL 24I the acceleration sensor is even delivered with a sampling rate of 1600 Hz. The shock and vibration logger is therefore ideally suited for use in fault diagnosis, stress testing, machine inspection, shock measurements and preventive maintenance.
1x Data cable USB – USB Micro
1x 4 GB SD memory card
1x SD card ejector tool
1x USB pen drive with PC software and user manual
