LED Stroboscope
RT STROBE 5000 LED
| Κωδικός | Τιμή | Στοκ | |
|---|---|---|---|
| RT STROBE 5000 LED | €2.019,00 | Κατόπιν Παραγγελίας |
Τιμές χωρίς ΦΠΑ 24%
| Technical specifications | ||
General |
||
| Frequency range | 0…120,000 FPM (flashes per minute) | |
| Power supply | 15...28V DC/ 60W | |
| External trigger input |
3...30 V / maximum 5 mA DIN 41524 5-pin standard connector Uout = Uin, maximum 200 mA Trigger input with switching capability |
|
| Trigger output | for parallel circuit | |
| Flash parameter | ||
| Flash period | < 10 μs. | |
| Light intensity | typical, 30 – 100% | |
| Light intensity | Single flash approx. 20 Mega-Lux / 30 cm / 12" | |
| Main | approximately 7,500 Lux / 30 cm / 12" (@ 6,000 FPM) | |
| Flash energy | 2,000 mJ (@ ≤ 1,000 FPM) | |
| Light color | 6000...6,500 K | |
| Housing | ||
| Material | Aluminum | |
| Dimensions | 224 x 130 x 112 mm / 8.8 x 5.1 x 4.4" | |
| Weight | 2,100 gr | |
| Environmental conditions | ||
| Ambient temperature | 0...40 °C (32...104 °F) | |
| Storage temperature | -25...70 °C (-13...158 °F) | |
| Humidity | Maximum 95%, non-condensing | |
RT STROBE 5000 LED stroboscope
with smart LED technology for back up to 500 mm / input signal generator
with smart LED technology for back up to 500 mm / input signal generator
The main advantage of an RT STROBE 5000 LED stroboscope with smart LED technology is the absence of a short-lived xenon tube, which is usually the first component to show wear or defect and must be replaced. Compared to this, the LEDs of this stroboscope are almost indestructible with no detectable wear. 120 LEDs achieve significantly higher flash frequency than xenon tubes and produce a subjectively pleasant light with silent flashes. Activation of the rotational speed control meter is done directly from the observed system or via the supplied RT Strobe ECO control unit. This small control unit can simply be connected to one of the sockets on the back of the stroboscope. Due to the standard existing connections, a machine signal and a signal from the control unit can be transmitted simultaneously. Switching between the two inputs can be achieved using the toggle switch on the back of the stroboscope.
- Low wear LED
- illumination area 300 x 500 mm
- high light intensity 7500 LUX
- illumination area 300 x 500 mm
- high light intensity 7500 LUX
- adjustable light frequency
- web width> 500 mm
- parallel operation of rotary device
- web width> 500 mm
- parallel operation of rotary device
Package contents:
1x RT STROBE 5000 LED stroboscope
1x power supply
1x User manual
1x plug for trigger input and power supply
