LED Stroboscope
RT STROBE 7000 LED
| Κωδικός | Τιμή | Στοκ | |
|---|---|---|---|
| RT STROBE 7000 LED | €2.862,00 | Κατόπιν Παραγγελίας |
Τιμές χωρίς ΦΠΑ 24%
|
Technical data |
||
General |
||
| Frequency range | 0…120,000 FPM (flashes per minute) | |
| Power supply |
24 VDC (+/- 10%) / 40 W DIN 41524 5-pin standard connector Available general-purpose transformer |
|
| External trigger input |
3...30 V / maximum 5 mA DIN 41524 5-pin standard connector Uout = Uin, maximum Trigger input switching capability 200 mA |
|
| Trigger output | for parallel circuit | |
| Flash parameter | ||
| Flash period | 1–1000 μSec, adjustable | |
| Light intensity | typical, 30 – 100% | |
| Single flash with light intensity | approximately 20 Mega-Lux / 30 cm / 12" | |
| Maximum light intensity | 9,000 Lux @ 30 cm / 12" | |
| Illumination area | 300 x >500 mm / 12 x >20" | |
| Light color | approximately 5,000…8,300 K | |
| Housing | ||
| Material | Aluminum | |
| Dimensions | 440 x 130 x 112 mm / 17.3 x 5.1 x 4.4" | |
| Weight | 2,100 gr | |
| Environmental conditions | ||
| Ambient temperature | 0...40 °C (32...104 °F) | |
| Storage temperature | -25...70 °C (-13...158 °F) | |
| Humidity | Maximum 95%, non-condensing | |
RT STROBE 7000 LED Stroboscope
with smart LED technology for back up to 500 mm / input signal generator
with smart LED technology for back up to 500 mm / input signal generator
The main advantage of an RT STROBE 7000 LED stroboscope with smart LED technology is the absence of a short-lived xenon tube, which is usually the first component to show wear or defect and needs to be replaced. Compared to this, the LEDs of this stroboscope are almost indestructible with no detectable wear. The LEDs achieve significantly higher flash frequency than xenon tubes and produce a subjectively pleasant light with silent flashes. Activation of the rotational speed control meter is done directly from the observed system or via the supplied RT Strobe ECO control unit. This small control unit can simply be connected to one of the sockets on the back of the stroboscope. Due to the standard existing connections, a machine signal and a signal from the control unit can be transmitted simultaneously. Switching between the two inputs can be achieved using the toggle switch on the back of the stroboscope.
- Low wear LED
- Illumination area 300 x 500 mm
- High light intensity
- Illumination area 300 x 500 mm
- High light intensity
- Adjustable light frequency
- Web width> 500 mm
- parallel operation of rotary device
- Web width> 500 mm
- parallel operation of rotary device
Package contents
1x RT STROBE 7000 LED Stroboscope
1x Power supply
1x User manual
1x Plug for trigger input and power supply
