New Products

Technical Specifications Measuring surface diameter (plate): Ø98 mm Maximum workpiece height: 180 mm Maximum measurement wi...

Technical Specifications Earth resistance measurement: Range: 20Ω / 200Ω / 2000Ω Reading: 0.01 Ω / 0.1 Ω / 1 Ω Accurac...

Technical Specifications Operating temperature: 0~40°C Operating humidity: ≤80% RH Weighing surface dimensions: 300 × 224 mm ...

Technical Specifications Test voltages: 500V, 1000V, 2500V, 5000V DC voltage measurement: (30–600V), resolution: 1V, accuracy: ±(2%+3...

Technical Specifications Reading: <0.1 HL Accuracy: ±6 HL (when HLD=800) Measuring range: HL: 170–960 HR: H...

Technical Specifications Codes: HDT-CB320 (with wired pin), HDT-WL320 (with wireless pin) Tip type: Dual-coil, high precision ...

Technical Specifications Imprint diameter range: MB325: Ø1–2 mm, Ø2–4 mm MB326: Ø0.5–1.6 mm, Ø3–6 mm ...

Technical Specifications Application: ISHW-D20: general use on aluminum ISHW-D21: for thick aluminum pieces ISHW-D22...

Technical Specifications Units of measurement: Shore A / Shore D Test type: Shore A: for medium hard rubber and thermoplastics...

Technical Specifications Measuring range: 0–10 mm Reading (Graduation): 0.05 mm Accuracy: ±0.1mm Measuring tips: Point...

Technical Specifications Accuracy: ±0.007 mm Repeatability: 0.002 mm Contact tip types: Ceramic Display type: Analog ...

Technical Specifications Measuring range: 12.7 mm / 25.4 mm / 50.8 mm depending on model Maximum measuring force: 1.5 N – 2.5 N ...

Technical Specifications Type: Brinell, Rockwell, Vickers Test Force: Brinell: 306.5N to 2451.6N (31.25kgf to 250kgf) R...

Technical Specifications Brinell scale: HBW2.5/62.5 to HBW10/3000 Hardness reading: 0.1HBW Platform lift: manual Lo...

Made of alloy steel Meet ISO3650 Supplied with manufacturer inspection certificate. Για πιστοποιητικό διακρίβωσης συμφωνα με 17025 ζητήστε προσφορ...

Made of alloy steel Meet ISO3650 Supplied with manufacturer inspection certificate. Για πιστοποιητικό διακρίβωσης συμφωνα με 17025 ζητήστε προσφορ...

Internal sensor Reading: 0.0005N Accuracy: ±0.3% (of load capacity) Push-pull test Functions: Peak (max.), tracking mode Units: mN, N, gf, kgf, o...

Internal sensor Reading: 0.0005N Accuracy: ±0.3% (of load capacity) Push-pull test Functions: Peak (max.), tracking mode Units: mN, N, gf, kgf, o...

Specifications Type: 818 R Height of roller supports: 65 mm (4622250), 100 mm (4622252) Diameter range: 3–30 mm (4622250, 4622251), 4...

Specifications Type: 818 P Height of V-supports: 70 mm (4622260), 120 mm (4622262) Diameter range: 5–20 mm (4622260, 4622261), 5–45 mm (4622...

The MarStand 818 is a radial runout testing system with center support, designed for measuring shaft eccentricity between two centers. It i...