Metric Thread Repair Set M13-M42
WTI-M
| Κωδικός | Dimensions | Drill | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|
| WTI-M14x1 | M 14 x 1.0 | 14.4 mm | €44,50 | 5-8 εργάσιμες | ||
| WTI-M14x1.25 | M 14 x 1.25 | 14.4 mm | €44,50 | 5-8 εργάσιμες | ||
| WTI-M14x1.5 | M 14 x 1.5 | 14.4 mm | €43,80 | 2 διαθέσιμα | ||
| WTI-M14x2 | M 14 x 2.0 | 14.5 mm | €44,00 | 1 διαθέσιμo | ||
| WTI-M16x1.5 | M 16 x 1.5 | - | €51,80 | 1 διαθέσιμo | ||
| WTI-M16x2 | M 16 x 2.0 | - | €51,80 | 2 διαθέσιμα | ||
| WTI-M18x1.5 | M 18 x 1.5 | - | €62,00 | 1 διαθέσιμo | ||
| WTI-M18x2 | M 18 x 2.0 | - | €62,00 | 5-8 εργάσιμες | ||
| WTI-M18x2.5 | M 18 x 2.5 | - | €62,00 | 1 διαθέσιμo | ||
| WTI-M20x1.5 | M 20 x 1.5 | - | €66,00 | 5-8 εργάσιμες | ||
| WTI-M20x2 | M 20 x 2.0 | - | €66,00 | 5-8 εργάσιμες | ||
| WTI-M20x2.5 | M 20 x 2.5 | - | €66,00 | 1 διαθέσιμo | ||
| WTI-M22x1.5 | M 22 x 1.5 | - | €74,00 | 5-8 εργάσιμες | ||
| WTI-M22x2 | M 22 x 2.0 | - | €74,00 | 5-8 εργάσιμες | ||
| WTI-M22x2.5 | M 22 x 2.5 | - | €74,00 | 5-8 εργάσιμες | ||
| WTI-M24x1.5 | M 24 x 1.5 | - | €82,00 | 5-8 εργάσιμες | ||
| WTI-M24x2 | M 24 x 2.0 | - | €82,00 | 5-8 εργάσιμες | ||
| WTI-M24x3 | M 24 x 3.0 | - | €82,00 | 1 διαθέσιμo | ||
| WTI-M26x1.5 | M 26 x 1.5 | - | €205,00 | 5-8 εργάσιμες | ||
| WTI-M27x1.5 | M 27 x 1.5 | - | €205,00 | 5-8 εργάσιμες | ||
| WTI-M27x2 | M 27 x 2.0 | - | €205,00 | 5-8 εργάσιμες | ||
| WTI-M27x3 | M 27 x 3.0 | - | €205,00 | 5-8 εργάσιμες | ||
| WTI-M28x1.5 | M 28 x 1.5 | - | €205,00 | 5-8 εργάσιμες | ||
| WTI-M30x1.5 | M 30 x 1.5 | - | €248,00 | 5-8 εργάσιμες | ||
| WTI-M30x2 | M 30 x 2.0 | - | €248,00 | 5-8 εργάσιμες | ||
| WTI-M30x3.5 | M 30 x 3.5 | - | €248,00 | 5-8 εργάσιμες | ||
| WTI-M33x2 | M 33 x 2.0 | - | €256,00 | 5-8 εργάσιμες | ||
| WTI-M33x3.5 | M 33 x 3.5 | - | €256,00 | 5-8 εργάσιμες | ||
| WTI-M36x1.5 | M 36 x 1.5 | - | €267,00 | 5-8 εργάσιμες | ||
| WTI-M36x2 | M 36 x 2.0 | - | €267,00 | 5-8 εργάσιμες | ||
| WTI-M36x3 | M 36 x 3.0 | - | €267,00 | 5-8 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Thread repair kits are used to fix damaged or defective threads in metals, many plastics, or composite materials.
The process of repairing threads in a damaged hole, using a V-COIL Set, involves the following steps:
- Drill out the damaged threads using a drill of the correct size.
- Then create a new thread with the tap included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the component.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque is released from the insertion tool. This will cause it to lock into the component.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar tool.
