Metric Thread Repair Kit
WTI-M
| Κωδικός | Dimensions | Drill | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|
| WTI-M2x0.4 | M 2 x 0.4 | 2.1 mm | €25,80 | 1 διαθέσιμo | ||
| WTI-M2.2x0.45 | M 2.2 x 0.45 | 2.3 mm | €50,40 | 5-8 εργάσιμες | ||
| WTI-M2.5x0.45 | M 2.5 x 0.45 | 2.6 mm | €25,00 | 1 διαθέσιμo | ||
| WTI-M3x0.5 | M 3 x 0.5 | 3.2 mm | €25,00 | 1 διαθέσιμo | ||
| WTI-M3.5x0.6 | M 3.5 x 0.6 | 3.7 mm | €25,00 | 1 διαθέσιμo | ||
| WTI-M4x0.7 | M 4 x 0.7 | 4.2 mm | €25,00 | 1 διαθέσιμo | ||
| WTI-M5x0.8 | M 5 x 0.8 | 5.3 mm | €25,50 | 2 διαθέσιμα | ||
| WTI-M6x1 | M 6 x 1.0 | 6.3 mm | €25,70 | 2 διαθέσιμα | ||
| WTI-M7x1 | M 7 x 1.0 | 7.3 mm | €34,40 | 5-8 εργάσιμες | ||
| WTI-M8x1 | M 8 x 1.0 | 8.3 mm | €34,40 | 1 διαθέσιμo | ||
| WTI-M8x1.25 | M 8 x 1.25 | 8.3 mm | €33,10 | 1 διαθέσιμo | ||
| WTI-M9x1 | M 9 x 1.0 | 9.3 mm | €71,00 | 1 διαθέσιμo | ||
| WTI-M9x1.25 | M 9 x 1.25 | 9.3 mm | €37,70 | 1 διαθέσιμo | ||
| WTI-M10x1 | M 10 x 1.0 | 10.3 mm | €36,20 | 2 διαθέσιμα | ||
| WTI-M10x1.25 | M 10 x 1.25 | 10.3 mm | €36,20 | 1 διαθέσιμo | ||
| WTI-M10x1.5 | M 10 x 1.5 | 10.4 mm | €34,90 | 1 διαθέσιμo | ||
| WTI-M11x1.5 | M 11 x 1.5 | 11.4 mm | €40,50 | 5-8 εργάσιμες | ||
| WTI-M12x1 | M 12 x 1.0 | 12.3 mm | €40,50 | 5-8 εργάσιμες | ||
| WTI-M12x1.25 | M 12 x 1.25 | 12.3 mm | €40,50 | 2 διαθέσιμα | ||
| WTI-M12x1.5 | M 12 x 1.5 | 12.4 mm | €40,00 | 1 διαθέσιμo | ||
| WTI-M12x1.75 | M 12 x 1.75 | 12.4 mm | €40,30 | 1 διαθέσιμo | ||
Τιμές χωρίς ΦΠΑ 24%
Thread repair kits are used to fix damaged or defective threads in metals, many plastics, or composite materials.
The process of repairing threads in a damaged hole, using a V-COIL Set, involves the following steps:
- Drill out the damaged threads using a drill of the correct size.
- Then create a new thread with the tap included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the component.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque is released from the insertion tool. This will cause it to lock into the component.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar tool.
