SNMG1204**-UC Inserts for Cast Iron - Finishing
K
SNMG1204**-UC
| Κωδικός | Cutting Depth (mm) | Radius (mm) | Grade | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| SNMG120408-UC-YG1010 | 1.0~4.0 | 0.8 | YG1010 | €5,90 | 5-8 εργάσιμες | ||
| SNMG120412-UC-YG1010 | 1.5~4.0 | 1.2 | YG1010 | €5,90 | 5-8 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Machining Materials
- (K) - Cast Irons - Grey Cast Iron (Cast Iron)
Chipbreaker
- (UC) - Geometry for general machining and finishing on cast iron. Features a small rake angle (rake angle) and a reinforced cutting edge with a flat section on the edge (T-land). Suitable for soft cast irons. Ensures very good surface quality.
Grade
- YG1010 – Ideal choice for cast iron (K05–K15). CVD TiCN–Al₂O₃ coating with special post-treatment for increased coating chipping resistance.
Feed
- Fn = 0.20~0.40 mm/rev
Cutting Speed
- (K15-16) - Vc=300~450 m/min
- (K17-18) - Vc=120~350 m/min
Turning inserts from YG1, a top cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the chipbreaker, i.e., the geometry that helps in breaking and removing the chip, as well as the grade, which describes the microstructure and coating of the insert and directly affects hardness and fracture toughness. The cutting conditions (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.
