Caliper Coating - Paint (car paint etc.) Ferrous and NonFerrous 1500 μm
PCE-CT 25FN
| Measurement range | 0 ... 1500 µm |
| Measurement accuracy | ± (1 µm + 3%L), where L is the measured thickness |
| Reading | 0.1 μm in the measuring range 0 ... 100 μm |
| 1 μm in the measuring range > 100 μm | |
| Units | μm, mm, mils |
| Minimum curvature | convex 5 mm, concave 25 mm |
| Minimum measuring surface | Ø 20 mm |
| Minimum substrate thickness | Fe: 0.3 mm |
| NFe: 0.05 mm | |
| Measuring rate | Maximum 2 Hz |
| Power supply | 9 V battery |
| Operating conditions | -10 ... 50 ° C, 20 ... 90% RH without condensation |
| Storage conditions | -10 ... 60 ° C, 20 ... 90% RH without condensation |
| Dimensions | 143 x 85 x 39 mm |
| Weight | approximately 100 g |
Coating Caliper with easy one-handed operation / Display of MIN, MAX and MEAN /
Battery indicator / Various units / Auto power off /
For ferrous and non-ferrous metals / Compact design
The coating thickness measuring device is used for the quick and accurate detection of the thickness of coatings on metal surfaces. Compared to many other paint thickness gauges, this coating thickness measuring device does not need to differentiate between ferrous and non-ferrous metals. With the small and compact design of the device, one-handed operation is possible. The coating thickness measuring device has a measuring range of 1500 μm and an accuracy of ± (3% + 1 μm).
The user can select the measurement unit (μm, mm, mils). In addition to the coating thickness, the Caliper measures the smallest, largest, and also the average value from a series of different measurements. The device switches off automatically.
- Small and compact design
- Fast measurement frequency
- Calibration set included
- Option to select different units
- For continuous measurements
- Comfortable one-handed operation
Package contents
1 x PCE-CT 25FN coating Caliper
5 x Calibration sheet reference
1 x Fe zero standard
1 x NFe zero standard
1 x 9 V battery
1 x Instruction manual
