Measurement range 0 ... 1500 μm Measurement accuracy ± (1 µm + 3%L), where L is the measured thickness Reading 0.1 μm in the measurement...

Specifications Measuring range: 0~3000 μm Resolution: 0.1 μm (range <100 μm) 1 μm (range 100~1000 μm) 0.01 mm (range 1~3 mm) Accu...

Range: 0~2000 µm Accuracy: ±(2μm + 3%L), where L is the measured thickness in μm Suitable for both magnetic and non-magnetic metal substrates 3 m...

Range: 0~5000 μm Accuracy: ±(2μm + 3%L), where L is the measured thickness in μm Suitable for both magnetic and non-magnetic metal substrates 3 ...

Suitable for both magnetic and non-magnetic metal substrates. Can measure the thickness of non-magnetic coating and non-metallic coating on a magn...

The coating thickness gauge (FE) measures the thickness of non-magnetic coating and non-metallic coating on a magnetic metal substrate. Substra...

  Sensor Type F and Type N Type F   Measurement range 0 ... 5000 μm / 0 ... 5 mm / 0 ... 196 mm Measurement accuracy ± (2% + 1 μm) R...

Measurement range 0 ... 1250 µm (0 ... 49.2 mils) Reading 1 µm (0.039 mils) Accuracy ± (2 µm + 3%L) or ± (0.079 mils + 3%L), where L is t...

  Can measure thin coatings below 10μm Suitable for both magnetic and non-magnetic metal substrates Can measure the thickness of the non-magnetic ...

  Measurement range 0 ... 1250 µm / 49.2 mils Reading 0.1 µm / 0.004 mils (in range from 0.0 to 99.9 µm / 3.9 mils)1 µm / 0.04 mils (above ra...

It can measure thin coatings below 10μm Suitable for both magnetic and non-magnetic metal substrates It can measure the thickness of the non-magne...

Specifications Probe types: Magnetic induction (FM - included), optional FL, FX, FS, FH, NM Measuring range: 0~1500μm (FM), up to 10000μm depe...

Made of stainless steel.

Dry film thickness gauges are used to inspect finished coatings. Mechanical coating thickness gauges provide many advantages. They are very han...

Frequency range 0.01 ... 16000 kHz Sensor supply voltage 0, 5, 1, 2, 4, 6V Phase shift of the signal...

Cup diameter 20mm / 0.8in Maximum sadness 12mm / 0.5in Reading 0.01 mm Maximum compressive strength 2500 N Dimensions 290 x 230 x ...

A rotational abrasion tester, also known as a Taber Abraser or Taber Wear Tester, is a device used to assess the resistance and durability o...

For calibration or accuracy check of coating thickness gauges Optimization of measurement accuracy after sheet calibration Uniformity: ±0.3 μm (&l...

Specifications Measuring range: 0.05–10mm (customizable for coating >10mm) Output voltage: 0.6–30.0kV (stepless adjustable) Resolution: 0...