PCE-CT 80HP-FN1D5 - Coating-paint Thickness Gauge - Ferrous and NonFerrous range 0-1500μm
| Κωδικός | Ακρίβεια | Πάχος Fe | Πάχος NFe | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| PCE-CT 80HP-FN0D5 | ±(1%+0.5μm) | 0..500 μm | 0..500 μm | €1.134,00 | Με παραγγελία | ||
| PCE-CT 80HP-FΝ1D5 | ±(1%+1μm) | 0..1500 μm | 0..1500 μm | €1.094,00 | Με παραγγελία | ||
| PCE-CT 80HP-FN2 | ±(1%+1μm) | 0..2000 μm | 0..2000 μm | €1.114,00 | Με παραγγελία | ||
| PCE-CT 80HP-FN2D5 | ±(1%+1μm) | 0..2500 μm | 0..2500 μm | €1.128,00 | Με παραγγελία | ||
| PCE-CT 80HP-FN3 | ±(1%+1μm) | 0..3000 μm | 0..3000 μm | €1.134,00 | Με παραγγελία | ||
| PCE-CT 80HP-F5N3 | ±(1.5%+1μm) | 0..5000 μm | 0..3000 μm | €1.140,00 | Με παραγγελία | ||
Τιμές χωρίς ΦΠΑ 24%
| Measurement range | Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm |
| Accuracy after membrane calibration | ±(1.0 % of measured value + 1 µm) |
| Accuracy after zeroing | ±(1.5 % of measured value + 1 µm) |
| Probe diameter | Ø17mm / 0.67" |
| Reading | 0.1 µm (<100 µm), 1 µm (>100 µm) |
| Measurable materials | |
| Fe substrates | steel and iron |
| NFe substrates such as: | aluminum and copper |
| Minimal radius of curvature (convex) | 5mm / 0.19" |
| Minimal radius of curvature (concave) | 25mm / 0.98" |
| Minimal measurement surface | Ø17mm / 0.67" |
| Minimum layer thickness | 0.2mm / 0.007" (on magnetic materials) |
| 0.05mm / 0.002" (on non-magnetic materials) | |
| Detector mode | Automatic material detection function (Fe + NFe) |
| Magnet Mode (Fe) | |
| Eddy Current Function (NFe) | |
| Calibration | Multi-point calibration |
| (1 ... 4 points for each group) | |
| Zero calibration | |
| Units | µm, mm, mils |
| Exit | USB 2.0 |
| Memory | A flight measurement group (DIR mode) |
| Four measurement groups with automatic storage and a maximum of 2000 readings (GEN mode) | |
| Measurements | Number of measured values, average, |
| minimum, maximum, standard deviation | |
| Alarm | Indication when the adjustable value of the upper and lower alarm limits is exceeded |
| Power off function | Automatic power off (after 3 minutes of inactivity) |
| Power supply | 3 x 1.5V AAA batteries |
| Screen | LCD 128 x 128 pxl |
| Additional display indications | battery status, error detection |
| Operating conditions | 0 ... +50 °C / 32 ... 122 °F |
| 20 ... 90 % RH non-condensing | |
| Storage conditions |
-10 ... +60 °C / 14 ... 140 °F |
| 20 ... 90 % RH non-condensing | |
| Dimensions | 143 x 71 x 37mm / 5.6 x 2.8 x 1.4" (L x W x H) |
| Weight | with sensor and batteries: 271 g / 9.5 oz |
Coating thickness gauge with V groove sensor / Measuring range from up to 0 ... 1500 μm /
Adjustable alarm limits / Rugged housing / Software / Data storage /
High accuracy ± (1.0% of reading + 0.5 µm)
Adjustable alarm limits / Rugged housing / Software / Data storage /
High accuracy ± (1.0% of reading + 0.5 µm)
The coating thickness gauge can reliably determine the thickness of plastics, paints and other coatings on ferrous and non-ferrous metals. With a measuring range of up to 0 ... 1500 µm on ferrous metals, the coating thickness gauge covers a wide range of applications. Due to the accuracy up to ± (1.0% L + 0.5 µm), where L is the measured value, the caliper makes an accurate and reliable measurement. The sensor on the coating thickness gauge has a V groove, thanks to which it is possible to take measurements on curved and concave surfaces. In addition, the caliper has an alarm function, where the user has the possibility to store the desired limit values. A green light indicates a measurement that is within the limit values and a red light indicates a measurement that is outside the limit values.
Measured values can be stored as a memory of 2,000 records is available. The measured values can be transferred to a computer and analyzed using the software. For further processing, the data can be exported in CSV format.
- Practical V groove on the measuring heads
Measured values can be stored as a memory of 2,000 records is available. The measured values can be transferred to a computer and analyzed using the software. For further processing, the data can be exported in CSV format.
- Practical V groove on the measuring heads
- Adjustable limit values with warning alarm indicator
- Data memory for 2000 measurements
Package contents
1 x Coating Thickness Gauge PCE-CT 80HP-FN1D5
1 x Sensor
3 x 1.5V AAA batteries
1 x Carrying case
1 x Set of standard sheets
1 x Calibration plates (Fe and NFe)
1 x User Manual
1 x Sensor
3 x 1.5V AAA batteries
1 x Carrying case
1 x Set of standard sheets
1 x Calibration plates (Fe and NFe)
1 x User Manual
