PCE-DFG NF 0.5K - Digital Newton meter with calibration
by Pce
| Κωδικός | Range | Reading | Εύρος (Kg) | Τιμή ** | Στοκ | ||
|---|---|---|---|---|---|---|---|
| PCE-DFG NF 0.5K | 500 N | 0.05N | 50 kg | €1.288,00 | Με παραγγελία | ||
| PCE-DFG NF 1K | 1000 N | 0.1N | 100 kg | €1.288,00 | Με παραγγελία | ||
| PCE-DFG NF 2K | 2000 N | 0.2N | 200 kg | €1.288,00 | 2-5 εργάσιμες | ||
| PCE-DFG NF 5K | 5000 N | 0.5N | 500 kg | €1.288,00 | Με παραγγελία | ||
| PCE-DFG NF 10K | 10000 N | 1N | 1000 kg | €1.820,00 | Με παραγγελία | ||
| PCE-DFG NF 20K | 20000 N | 2N | 2000 kg | €1.820,00 | Με παραγγελία | ||
| PCE-DFG NF 50K | 50000 N | 5 N | 5000 kg | €1.820,00 | Με παραγγελία | ||
Τιμές χωρίς ΦΠΑ 24%
| Measurement range | 0 ... 0.5 kN / 500 N / 50 kg / 112 lbs |
| Reading | 0.05N / 0.01 lbs |
| Accuracy | ± 0.5% of measuring range |
| Units of measurement | N, kg, lb, kPa |
| Screen | 2.8" TFT |
| Alarm functions | Inside, Outside, Crack, Shutdown |
| Sampling rate | 6 ... 1600 Hz |
| Memory | 100 measurements |
| Power supply | NiMH battery, 6V / 1600-mAh |
| Battery life | About 10 hours |
| Current / charging transformer | 12V / 1A |
| Outputs | 12V / 50-mA |
| Sealing class | IP 54 |
| Operating and storage conditions | -10 ... 50°C / -14 ... 122 °F 5 ... 95% RH non-condensing |
| Dynamo cell dimensions | Ø 20 mm / H 12 mm / M3 thread (see technical drawing) |
| Length load cable | About 3 m / 9.8 ft |
| Dimensions | 200 x 97 x 42 mm / 7.9 x 3.8 x 1.7 in |
| Weight | 540g / 1.2lbs |
PCE-DFG NF 0.5K dynamometer
With external load cell/ USB output and PC software
The PCE-DFG NF 0.5K dynamometer is designed to measure compressive forces in hard-to-reach measuring points. It has a load cell, which is connected to the dynamometer with a 3 m cable and thanks to its small dimensions ensures the flexible application of the instrument. In addition, on the back side of the dynamometer, there are available holes that allow for fixed mounting on a stand.
Measurements can be stored in the internal memory of 100 locations or via USB port and with the supplied software, transmitted and stored to a computer at a maximum rate of 800 Hz in live measurement.
The PEAK Hold function allows the highest measured value to be held on the dynamometer display.
The dynamometer enables the user to select and store two limit values, which are constantly compared with the instantaneous value, which when it exceeds the upper or lower limit, an indication appears on the screen and a signal is also emitted in case of possible connection of the dynamometer with control systems.
- USB output
- Graphical display of measurements- Fast response time
- Computer software
- Memory for 100 measurements
Package contents
1 x PCE-DFG NF 0.5K
1 x Dynamo Cell
1 x USB Cable
1 x Charger
1 x PC Software
1 x User Manual
1 x Dynamo Cell
1 x USB Cable
1 x Charger
1 x PC Software
1 x User Manual
