Force Gauges - Newtonmeters
58 από 58 products
Analog tension-compression dynamometer (Newtonmeter Push-Pull) 10...500N
Push-Pull Dynamometer (tension and compression) Maintains the Max value Includes the following
Spring Scale Dynamometer 30...200N
Technical Specifications Measurement units: kg, N Accuracy: ±2%F.S. Tube diameter: 22mm to 50mm Overall length: 280mm to 455mm Weight: 28...
View full details
Digital tension-compression dynamometer (Newtonmeter Push-Pull) 10...1000N
Push - pull test Accuracy: ± 0.3 % Data output Over-limit alarm Measurement units: N, gf, kgf, ozf, lbf Memory: 500 positions Automatic power off ...
View full details
Digital tension-compression dynamometer (Newtonmeter Push-Pull) 50...500N
Measuring range 0.5 ... 50 N / 0.1 ... 11 lbs Reading 0.01 N / 0.002 lbs Pressure calibration 0.1 Mpa Load cell Integrated load cell w...
View full details
Digital Dynamometer (Newtonmeter) - Push-Pull 5...1000N Type A
Internal sensor Reading: 0.0005N Accuracy: ±0.3% (of load capacity) Push-pull test Functions: Peak (max.), tracking mode Units: mN, N, gf, kgf, o...
View full details
Digital Dynamometer (Newtonmeter) - Push-Pull 1kN...200kN Type B
Internal sensor Reading: 0.0005N Accuracy: ±0.3% (of load capacity) Push-pull test Functions: Peak (max.), tracking mode Units: mN, N, gf, kgf, o...
View full details
Digital Dynamometer (Newtonmeter) - Push 10kN...200kN Type C
Internal sensor Reading: 0.0005N Accuracy: ±0.3% (of load capacity) Push-pull test Functions: Peak (max.), tracking mode Units: mN, N, gf, kgf, o...
View full details
Analog dynamometer
Accuracy: ±2 % Dimensions (L x W x H): 90 x 47 x 19 mm Weight: 60 gr For clockwise and counterclockwise measurement
Digital Tension-Compression Dynamometer (Newtonmeter Push-Pull) 5...1000N
Description Dynamometer with internal measuring cell up to 1000 N / various alarm modes / graphic display / data logger / incl. software The ...
View full details
Compression Load Cell
Measuring range 0 … 1,000 N / 225 lbs Reading 20 N / 4.5 lbs Measurement accuracy ±2.5% of the measuring range Screen dimensions ...
View full details
Hydraulic Compression Load Cell 100 cm
Measuring range 0 … 1,000 [N] / 225 lbs Resolution 20 [N] / 4.5 lbs Measuring accuracy plus-minus 2.5% of the measuring range Hydrauli...
View full details
Tension meter for wires and wire ropes
Technical Specifications Accuracy: ±2%FS Display update frequency: 2 times/sec Maximum line speed: 2000 m/min Power supply: Rechargeable bu...
View full details
Tension Meter for Wire Ropes
The Dillon Quick-Check tension meter is the premier innovation in the cable tensioning industry. Nothing comes close to the absolute simplicity o...
View full details
Tips for Dynamometers - Compression
Specifications Accessory type: push tips and pull clamps, including a pull ring and special pull clamps Compatibility: for ISF series force ga...
View full details
Tips for Dynamometers - Compression
Specifications Accessory type: push tips, pull rings, and pull clamps for force gauges Compatibility: for force gauges (ISF-DF… / ISF-1DF… / I...
View full details
Tips for dynamometers - Tensile
Specifications Type: Push tips, pull rings, and pull clamps for force gauges Compatibility: for force gages (code ISF-DF..., ISF-1DF... and IS...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp attachment for force gauges Compatibility: For ISF series force gauges (e.g., ISF-DFL, ISF-1DF, and ISF-F) D...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp / tensile gripping accessory for force gages Compatibility: for force gages (code ISF-DF…, ISF-1DF… and ISF-F…...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp / tensile gripping accessory for force gauges Compatibility: for force gages (code ISF-DF…, ISF-1DF… and ISF-F...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp / tensile gripping accessory for force gauges Compatibility: for force gauges (code ISF-DF…, ISF-1DF… and ISF-...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Push tips and pull clamps/rings for force gauges Compatibility: for force gauges (code ISF-DF…, ISF-1DF… and ISF-F…) Di...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp for force gauges Compatibility: For ISF series force gauges (e.g., ISF-DF, ISF-1DF, ISF-F) Drawing dimension...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp / tensile fixture for force gages Compatibility: for force gages (code ISF-DF…, ISF-1DF… and ISF-F…) Drawing...
View full details
Tensile Clamp for Dynamometers
Specifications Type: Pull clamp / tensile gripping accessory for force gauges Compatibility: for force gauges (code ISF-DF…, ISF-1DF… and ISF-...
View full details
Tensile Clamp for Dynamometers
Tensile Clamp for Dynamometers - for Cables
Dynamometer Base 1000 N - Vertical and Horizontal
Vertical Motorized Dynamometer Stand 5000 N
Vertical Base for Dynamometer 500 N - Compression Only
Horizontal Base for 500N Dynamometer, Tension Only
Dynamometer Base 45° 500 N
Clamp for dynamometers
Dynamometer Base 500 N - Vertical and Horizontal
Horizontal Motorized Dynamometer Base 500 N
Vertical Motorized Dynamometer Stand 500 N
Vertical Dynamometer Base 1000 N
Vertical Digital Dynamometer Base 500 N
Ring Adapter for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Clamp for Dynamometer
Ring for Dynamometer
Force gauges (Newtonmeters) measure tensile (pull) and compressive (push) force to verify loads in N or kgf. They are used for repeatable strength tests, assembly verification and documented results in controlled procedures.
Available in mechanical and digital versions, with multiple ranges, resolution and features such as peak hold, data logging and PC output. Choose from various hooks/adapters and mounting accessories, from Insize, PCE Instruments & Eilon.
Suitable for QC, R&D and product testing in industry, laboratories and training environments.
Dynamometers Newtonmeters
The dynamometers are measuring instruments used to determine the tensile or compressive force applied to a body. Their operation is usually based on the deformation of a spring or the use of electronic load cells (load cells), converting mechanical stress into a measurable unit of force, the Newton (N).
- Types: They are classified into analog (spring) for simple applications and digital for high-accuracy measurements with data logging capability.
- Applications: Essential for material tensile tests, spring quality control, door closing force measurement, and laboratory physics experiments.
- Features: They offer Peak Hold function to retain the maximum value and the ability to switch units between Newton, kilograms (kg) and pounds (lb).