Tap for Conduit Cables - DIN 40432
TM-PG
| Κωδικός | Spearing | ØD2(mm) | Ød1(mm) | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| TM-PG7 | PG7 | 12.5 | 9 | €14,20 | 1 διαθέσιμo | ||
| TM-PG9 | PG9 | 15.2 | 12 | €18,70 | 1 διαθέσιμo | ||
| TM-PG11 | PG11 | 18.6 | 14 | €29,60 | 1 διαθέσιμo | ||
| TM-PG13.5 | PG13.5 | 20.4 | 16 | €34,30 | 1 διαθέσιμo | ||
| TM-PG16 | PG16 | 22.5 | 18 | €40,50 | 1 διαθέσιμo | ||
| TM-PG21 | PG21 | 28.3 | 22 | €55,80 | 1 διαθέσιμo | ||
| TM-PG29 | PG29 | 37 | 28 | €83,00 | 5-8 εργάσιμες | ||
| TM-PG36 | PG36 | 47 | 36 | €120,00 | 5-8 εργάσιμες | ||
| TM-PG42 | PG42 | 54 | 40 | €188,00 | 5-8 εργάσιμες | ||
| TM-PG48 | PG48 | 59.3 | 45 | €221,00 | 5-8 εργάσιμες | ||
Description:
Machine Tap of an economic series from Baer. Suitable for basic machining on easy materials. Not recommended for production use or machining demanding materials, as its lifespan is limited due to its economical construction.
Machining Materials
Excellent choice for:
- (P1-5) - Common Carbon Steels - (Irons - Black - St37 - ck40)
Suitable but not optimal choice for:
- (P5-9) - Light Alloyed Steels - (Steels - Structural Steels)
Cutting Material
-
HSS – General purpose high-speed steel Traditional cutting tool steel. It is more economical but with limited performance at high temperatures or demanding materials.
-
Bright Finish (Uncoated) – Without coating, with a glossy surface. Mainly used on soft materials and general-purpose applications where there are no high demands.
Technical Specifications:
-
Thread: (PG) For Conduit cables DIN 40432
-
Hole Type: Through and Blind holes up to 4xD
-
Form: Form D - Chamfer 3~4 threads
-
Geometry: (Straight flute) Straight tap without chip guidance. Chips break into small pieces. Used in through and blind holes.
-
Tolerance: medium
-
Short length
