G Pipe Thread Repair Kit (BSP) (Drill not included)
| Κωδικός | Diameter | TPI | Drill (Not included) | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WTI-G-1/2-14 | 1/2" | 14 | 21.5 mm | €65,00 | 1 διαθέσιμo | ||
| WTI-G-5/8-14 | 5/8" | 14 | 23.5 mm | €140,00 | 2-5 εργάσιμες | ||
| WTI-G-3/4-14 | 3/4" | 14 | 27 mm | €140,00 | 2-5 εργάσιμες | ||
| WTI-G-7/8-14 | 7/8" | 14 | 30.5 mm | €206,00 | 2-5 εργάσιμες | ||
| WTI-G-1-11 | 1" | 11 | 33.5 mm | €206,00 | 2-5 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Χώρα πρoέλευσης Γερμανία
Thread repair kits are used to repair damaged or defective threads in metals, many plastics or composites.
The process of repairing the threads in a damaged hole, using a V-COIL Set, has the following steps:
- Drill out the damaged threads using an appropriately sized drill bit.
- Then create a new thread with the collet included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the part.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque from the insertion tool is released. This will make it lock onto the fixture.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar.
