Thread Repair Set American Fine Pitch 1.5D
WTI-UNF
| Κωδικός | Diameter | TPI | Drill | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WTI-UNF-2-64 | No. 2 | 64 | 2.3 mm | €102,00 | 5-8 εργάσιμες | ||
| WTI-UNF-3-56 | No. 3 | 56 | 2.6 mm | €102,00 | 5-8 εργάσιμες | ||
| WTI-UNF-4-48 | No. 4 | 48 | 3 mm | €32,40 | 5-8 εργάσιμες | ||
| WTI-UNF-6-40 | No. 6 | 40 | 3.7 mm | €32,40 | 5-8 εργάσιμες | ||
| WTI-UNF-8-36 | No. 8 | 36 | 4.4 mm | €32,40 | 5-8 εργάσιμες | ||
| WTI-UNF-10-32 | No. 10 | 32 | 5.1 mm | €32,40 | 1 διαθέσιμo | ||
| WTI-UNF-1/4-28 | 1/4" | 28 | 6.6 mm | €29,50 | 1 διαθέσιμo | ||
| WTI-UNF-5/16-24 | 5/16" | 24 | 8.2 mm | €35,30 | 1 διαθέσιμo | ||
| WTI-UNF-3/8-24 | 3/8" | 24 | 9.8 mm | €37,30 | 1 διαθέσιμo | ||
| WTI-UNF-7/16-20 | 7/16" | 20 | 11.5 mm | €41,20 | 1 διαθέσιμo | ||
| WTI-UNF-1/2-20 | 1/2" | 20 | 13 mm | €44,50 | 1 διαθέσιμo | ||
| WTI-UNF-9/16-18 | 9/16" | 18 | 14.8 mm | €56,60 | 1 διαθέσιμo | ||
| WTI-UNF-5/8-18 | 5/8" | 18 | 16.3 mm | €56,60 | 5-8 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Thread repair kits are used to fix damaged or defective threads in metals, many plastics, or composite materials.
The process of repairing threads in a damaged hole, using a V-COIL Set, involves the following steps:
- Drill out the damaged threads using a drill of the correct size.
- Then create a new thread with the tap included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the component.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque is released from the insertion tool. This will cause it to lock into the component.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar tool.
