1.5D American Thread Repair Kit - (Drill Not Included))
| Κωδικός | Diameter | TPI | Drill | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| WTI-UNF-3/4-16 | 3/4" | 16 | 19.5 mm | €56,30 | 2-5 εργάσιμες | ||
| WTI-UNF-7/8-14 | 7/8" | 14 | 22.8 mm | €69,00 | 2-5 εργάσιμες | ||
| WTI-UNF-1-12 | 1" | 12 | 26 mm | €76,00 | 2-5 εργάσιμες | ||
| WTI-UNF-1-1/8-12 | 1" 1/8" | 12 | 29 mm | €240,00 | 2-5 εργάσιμες | ||
| WTI-UNF-1-1/4-12 | 1" 1/4" | 12 | 32.5 mm | €264,00 | 2-5 εργάσιμες | ||
| WTI-UNF-1-3/8-12 | 1" 3/8" | 12 | 35.5 mm | €296,00 | 2-5 εργάσιμες | ||
| WTI-UNF-1-1/2-12 | 1" 1/2" | 12 | 38.5 mm | €354,00 | 2-5 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
Χώρα πρoέλευσης Γερμανία
Thread repair kits are used to repair damaged or defective threads in metals, many plastics or composites.
The process of repairing the threads in a damaged hole, using a V-COIL Set, has the following steps:
- Drill out the damaged threads using an appropriately sized drill bit.
- Then create a new thread with the collet included in the set.
- Screw the spring into the new thread in the hole, using the insertion tool, just below the surface of the part.
- Unscrew the insertion tool. The threaded insert will expand slightly as the torque from the insertion tool is released. This will make it lock onto the fixture.
-
BaerCoil thread inserts can be shortened, depending on the required length, with a side cutter or similar.
