Μετάβαση στο περιεχόμενο
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ

Αισθητήρας Δόνησης

IP
Κωδικός Τιμή Στοκ
PCE-VMS 100 €1.140,00 Με παραγγελία


Τιμές χωρίς ΦΠΑ 24%
Technical Specifications - PCE-AC420-210 Sensor
Measuring range (RMS) at 4-25-mA                                                                        0.2 ... 25 mm / s
Nominal value (RMS) at 20-mA 20 mm / s
Sensitivity 0.8-mA / mms-1
3 dB lower frequency limit 10 Hz
3 dB upper frequency limit     1000 Hz
Stabilization time at 1% tolerance 2 s
Loop supply voltage 12 ... 30V
Destruction limit plus-minus 4000 g / 8.8 lbs
Transverse sensitivity <5%
Operating temperature -40 ... 85ºC / -40 ... 185ºF
Type of protection IP67
Weight without cable   66 g / 2.3 oz
Shell material Stainless steel
Connector Male connector
Mounting M8 threaded hole
Technical specifications - PCE-DPD-U screen
Screen 4-digit red LED
Digit Height 14 mm
Processes Vexc +15 Vdc configurable in terminal 5
Response time < 300 mSec (0% to 99% signal)
'U' power 18 to 265V AC / DC (isolated 1500 Veff @ 60 sec.)
Power 230V AC / 24V (depending on version)
Entry 4 ... 20-mA
Departures SLOT1: relay R1 included (optionally, you can request analog output 4-20..A or RS485 Modbus RTU output)
SLOT2: empty (optionally, you can request a relay relay R2, if R1 is already installed)
Type of protection IP65
Connections Screw plug-in terminal
Feeding 18… 265V AC (50 / 60Hz) / DC
Environmental conditions 0 ... 50degreesC / 32 ... 122degreesF
Weight < 150 grams
Dimensions 96 x 48 x 91 mm / 3.8 x 1.9 x 3.6 in (including terminal)
General specifications
Regulations To control machinery for predictive maintenance according to ISO2372, ISO10816, ISO20816, etc.
Alarm Configurable setpoint


Vibration analyzer PCE-VMS 100
Kit with digital display and vibration sensor for predictive maintenance / Digital display 96 x 48 mm multi-signal with 4 digits

This PCE-VMS 100 vibration analyzer is a simple construction device for vibration control in machines and installations. This device detects vibrations caused by balance mismatches, defective adjustments, loose parts, defects in rollers or gears. When the threshold set in the device is reached or exceeded, an alarm is sent or the machine is turned off. Constant control allows early detection of possible machine defects. This in turn allows you to plan in advance the maintenance work, which avoids stopping the machines or the installation, thus avoiding economic losses. The device is used in virtually any industry and machine control sector.

Functions included PCE-DPD-U
- 1 or 2 alarms, configurable independently, of max. o min., set point and hysteresis
- Display filters
- Indicator with 5 brightness levels
- Password to block the configuration menu
- Universal power supply 18… 265V AC (50 / 60Hz) / DC

Sensor information PCE-AC420-210
- Range Measuring 0.2 ... 20 mm / s
- Linear frequency range (± 3 dB) 10 ... 1000 Hz
- Degree of protection IP67
- Shielded connector 713 (M12), axial
- Approx. 66 g
1 x Programmable indicator (PCE-DPD-U) with 1 relay output (PCE-DPD-U / R1)
1 x RMS vibration speed sensor (PCE-AC420-210)
1 x M12 straight connector with screw terminals for cable Ø 4 .. 6 mm (PCE-AC420 | M12)
1 x Stainless steel base for adhesive mounting (PCE-AC420 | ADH_PAD)
1 x Magnetic base (PCE-AC420 | MAG_PAD)
2 x Mounting studs