Το Μικρόμετρο σπειρωμάτων είναι ένα εξειδικευμένο εργαλείο μέτρησης που χρησιμοποιείται για την ακριβή μέτρηση της μέσης διαμέτρου (Pitch Diameter)...

Measure the web thickness of drills, small grooves and keyways Ratchet stop Carbide tips Supplied with setting standards (except 0-25mm).

Measure splined shafts, slots and keyways Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Measure root tangent length of gear Ratchet stop Supplied with setting standards.

Measure diameter of wires and small balls Ratchet stop Carbide measuring faces.

Το μικρόμετρο κονσερβας είναι ένα εξειδικευμένο εργαλείο μέτρησης που χρησιμοποιείται για τη μέτρηση των διαστάσεων των ραφών κονσερβών, ιδιαίτερα ...

Dial indicator: range ±0.04mm, accuracy 0.001mm Carbide measuring faces Supplied with setting standards (except 0-25mm).

For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N Carbide measuring faces Optiona...

Ratchet stop Carbide measuring faces Supplied with setting standards Optional accessory: dial indicators (graduation 0.01mm), digital indicators (...

Measure thickness of disk brakes Ratchet stop Carbide measuring faces Supplied with setting standards.

Carbide measuring faces Meet DIN863 Ratchet stop Supplied with setting standards (except 0-25mm).

Measure the groove diameter of shafts and keyways Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm).

Measure width of grooves inside bores Non-rotating spindle Two graduations for inside and outside measurement.

Deep frame suitable for sheet metal, paper and plastic Ratchet stop Carbide measuring faces.

Measure root tangent length of gear Non-rotating spindle Ratchet stop Supplied with setting standards.

Non-rotating spindle Ratchet stop Supplied with 7 pairs of anvil/spindle tip Setting standards are included (except 0-25mm) Optional accessary: 55...

Non-rotating spindle Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Measure hub thickness and shoulder inside a bore Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Measure tube thickness, shoulder edge distance, rivet head height, etc Supplied with flat anvil and rod anvil Ratchet stop Carbide spindle tip Set...

Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with 3 or 5 flutes Ratchet stop Carbide measuring faces Supplied ...

Used as Go/No-Go gauge by setting upper and lower limits Carbide measuring faces Supplied with setting standard (except 0-25mm).