Skip to content
2102231624 - Δωρεάν μεταφορικά άνω 50€ - Τιμές χωρίς ΦΠΑ
2102231624 - Δωρεάν μεταφορικά άνω 50€

Machine Taps Inch

Product Characteristics
Υλικό
HSS Co5
HSS Co5
Επικάλυψη
TIALN
TIALN
Extra (Κολαούζα)
Τυφλές Οπές
Τυφλές Οπές
Σπείρωμα
UNC - Ιντσες
UNC - Ιντσες
TM-SP-INOX-UNC
P
●
M
●
K
●
N
●
S
●
H
●
P
Steel
M
Stainless steel
K
Grey cast iron, malleable and spheroidal iron
N
Aluminium and other non-ferrous metal
S
Special, super and titanium alloys
H
Hardened steel and chilled cast iron
● = Optimal     ○ = Secondary

Machine Tap UNC-American Thread Inch - for Stainless Steel - Blind Holes

€29,90 - €196,00
€29,90 - €196,00
€29,90 - €196,00
€29,90
HSS Co5TIALNΤυφλές ΟπέςUNC - Ιντσες
Available

Machine taps inch are cutting tools used to produce internal threads to UNC/UNF standards by removing material inside a pre-drilled hole. They are intended for lathes, milling machines and machining centers, delivering consistent pitch and accuracy in repeatable production.

Available in multiple diameters and pitches, with straight or spiral flutes, versions for through holes or blind holes, and wear-resistant coatings for longer tool life. Options from Baer, Yg & Hepyc.

When selecting, consider workpiece material, hole type and chip evacuation needs to minimize breakage and thread defects.

Related Collections

Κολαούζα Ίντσας Χειρός

Inch Hand Taps

15 products
Σετ Κολαουζα Μηχανής

Tap & Die Sets

13 products
Μανέλες για Κολαούζα

Tap Wrenches

7 products
Κολαουζα Μετρικα Χειρός

Metric Hand Taps

13 products
Τσοκ Κολαουζων

Tap Chucks

7 products
Κολαουζα Μετρικα Μηχανής

Machine Taps Metric

31 products
Τσοκ Κολαουζων

Tap Chucks

7 products
Κολαουζιέρες

Tapping Machines

14 products
Φιλιέρες Μετρικές

Metric Thread Dies

10 products
Σπειρομετρα - Thread Pitch Gage

Thread Gauges

7 products
Σετ Επιδιόρθωσης Σπειρωμάτων Μετρικά

Metric Thread Repair Kit

4 products
Πίνακες Σπειρωμάτων & Ανοχών

Thread Gauges & Tolerances

2 products
Tap Wrench
Wiki

Tap Wrench

Tap taps are precision cutting tools used to create an internal thread in a hole (e.g. in nuts or holes in metal). This process is called tapping and requires the use of a special tap wrench or machine (drill/CNC).

  • Main Categories:Hand (3-piece set): Consists of the taper (conical), the intermediate and the bottoming tap. They are used sequentially to distribute the cutting load and ensure perpendicularity.Machine: Designed for a single pass. They are divided into Spiral Point (push the chip forward - for through holes) and Spiral Flute (pull the chip out - for blind holes).
  • Materials & Coatings: Usually made from HSS or HSS-E (Cobalt) for higher resistance to heat. They often have a TiN (gold color) coating to reduce friction.
  • Important Rule: Before use, the appropriate hole must be drilled. The general formula for metric threads is:$D_{hole} = D_{nominal} - P$(Where $D$ is the diameter and $P$ is the thread pitch).
Read More