Cutting Materials

• (P) - Steels - Alloy Steels (Steel - Alloy Steel)

Roughing Tool

• (UR) - Geometry designed for roughing and interrupted cutting in steels. It has a relatively moderate rake angle (rake angle) and a reinforced cutting edge with a flat section on the edge (T-land). Suitable for heavy roughing *(roughing*) and interrupted cuts. Combines high toughness (toughness) and wear resistance (wear resistance)

Grade

• YG3030 – Ideal for interrupted cutting in steel and stainless steels (P20–P35). New CVD TiCN - Al₂O₃ coating technology. Substrate specially designed for high toughness and balance of wear and coating chipping resistance

Feed

• Fn = 0.30~0.50 mm/rev

Cutting Speed

• (P1-5) - Vc=130~350 m/min
• (P5-9) - Vc=130~280 m/min
• (P10-11) - Vc=70~110 m/min

Turning inserts from YG1, a top cutting tool manufacturer from Korea. The choice of the appropriate insert depends on the roughing tool, that is the geometry that helps in breaking and removing the chip, as well as the grade, which describes the microstructure and coating of the insert and directly affects hardness and toughness. The cutting conditions (speed, feed, depth) must be carefully set to achieve maximum tool performance and life.