PCE-CT 80-FN1D5 - Coating-paint Thickness Gauge - Ferrous and NonFerrous range 0-1500μm
| Κωδικός | Ακρίβεια | Πάχος Fe | Πάχος NFe | Τιμή | Στοκ | ||
|---|---|---|---|---|---|---|---|
| PCE-CT 80-FN0D5 | ±(1%+1μm) | 0..500 μm | 0..500 μm | €789,00 | Με παραγγελία | ||
| PCE-CT 80-FN1D5 | ±(2%+1μm) | 0..1500 μm | 0..1500 μm | €978,00 | Με παραγγελία | ||
| PCE-CT 80-FN2 | ±(2%+1μm) | 0..2000 μm | 0..2000 μm | €989,00 | Με παραγγελία | ||
| PCE-CT 80-FN2D5 | ±(2%+1μm) | 0..2500 μm | 0..2500 μm | €1.003,00 | Με παραγγελία | ||
| PCE-CT 80-F5D3 | ±(2%+1μm) | 0..5000 μm | 0..3000 μm | Ζητήστε Προσφορά | Με παραγγελία | ||
Τιμές χωρίς ΦΠΑ 24%
| Measurement range | Fe: 0 ... 1500 µm |
| NFe: 0 ... 1500 µm | |
| Accuracy | ±(2 % of reading + 1 µm) |
| Reading | 0.1 µm (<100 µm) |
| 1 µm (>100 µm) | |
| Measurable materials | For measurements on iron/steel and non-ferrous metals |
| Minimal radius of curvature (convex) | 5mm / 0.19" |
| Minimal radius of curvature (concave) | 25mm / 0.98" |
| Minimal measurement surface | Ø17mm / 0.67" |
| Minimum substrate thickness | 0.2mm / 0.008" (in magnetic materials) |
| 0.05mm / 0.002" (on non-magnetic materials) | |
| Detector mode | Automatic mode with material detection (Fe + NFe) |
| Magnetic Mode (Fe) | |
| Eddy Current Function (NFe) | |
| Calibration | Multi-point calibration (1 ... 4 points for each group) |
| Zero point calibration | |
| Units | µm, mm, mils |
| Exit | USB 2.0 |
| Memory | A flight measurement group (DIR mode) |
| Four measurement groups with automatic storage and max 2000 readings (GEN mode) | |
| Measurements | Number of measured values, mean value, minimum value, maximum value, standard deviation |
| Alarm | Indication when adjustable upper and lower alarm limits are exceeded |
| Operating time | Auto Power Off (3 minutes) |
| Power supply | 3 x 1.5V AAA batteries |
| Screen | LCD 128 x 128 pxl |
| Additional display indications | Battery status |
| Fault detection | |
| Operating conditions | 0 ... +50 °C / 32 ... 122 °F |
| 20 ... 90 % RH non-condensing | |
| Storage conditions | -10 ... +60 °C / 14 ... 140 °F |
| 20 ... 90 % RH non-condensing | |
| Dimensions | 143 x 71 x 37mm / 5.6 x 2.8 x 1.5" (L x W x H) |
| Weight | With sensor and batteries: approx 271g / 9.5oz |
Coating thickness gauge for Fe and NFe / USB output / Battery operation /
Built-in memory
Built-in memory
PCE-CT 80-FN1D5 is a high-precision coating measuring device for non-destructive measurement of non-magnetic coatings such as paint, plastic, chrome, copper, zinc, enamel, etc. on steel/iron, as well as non-conductive coatings such as paint, plastic, enamel, paper, glass, rubber, etc. in copper, aluminum, brass and stainless steel, as well as anodized aluminum. Thanks to the externally connected sensor, the user can take a measurement in hard-to-reach places. The meter's easy menu navigation makes it particularly easy to use and ideal for production and quality control applications as well as damage and coating damage inspection.
- For measurements on iron/steel and non-ferrous metals
- Measurements cannot be affected by vibrations- For measurements on iron/steel and non-ferrous metals
- Practical V groove on the measuring heads
- Ergonomic design
- Warning message for measurements outside the maximum measurement range
- Wear-resistant, spring-loaded measuring head for accurate measurement results
Package contents
1 x Coating thickness gauge PCE-CT 80-FN1D5
3 x AAA Batteries
1 x User Manual
1 x Carrying case
1 x Set of standard sheets
1 x Calibration plates (Fe and NFe)
3 x AAA Batteries
1 x User Manual
1 x Carrying case
1 x Set of standard sheets
1 x Calibration plates (Fe and NFe)
