ET4JET - Κονδύλι 4Φτερο Καρβιδίου Jet-Power INOX για συμβατικά
από Yg
| Κωδικός | Διάμετρος | Στέλεχος | Βάθος Τρύπας | Τιμή ** | Στοκ | ||
|---|---|---|---|---|---|---|---|
| ET4JET-2 | 2 mm | 4 mm | 40 mm | €25,70 | 2-5 εργάσιμες | ||
| ET4JET-2.5 | 2.5 mm | 4 mm | 40 mm | €25,70 | 2-5 εργάσιμες | ||
| ET4JET-3 | 3 mm | 6 mm | 45 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-3.5 | 3.5 mm | 6 mm | 45 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-4 | 4 mm | 6 mm | 45 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-4.5 | 4.5 mm | 6 mm | 45 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-5 | 5 mm | 6 mm | 50 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-5.5 | 5.5 mm | 6 mm | 50 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-6 | 6 mm | 6 mm | 50 mm | €37,00 | 2-5 εργάσιμες | ||
| ET4JET-6.5 | 6.5 mm | 8 mm | 60 mm | €47,40 | 2-5 εργάσιμες | ||
| ET4JET-7 | 7 mm | 8 mm | 60 mm | €47,40 | 2-5 εργάσιμες | ||
| ET4JET-7.5 | 7.5 mm | 8 mm | 60 mm | €47,40 | 2-5 εργάσιμες | ||
| ET4JET-8 | 8 mm | 8 mm | 60 mm | €47,40 | 2-5 εργάσιμες | ||
| ET4JET-8.5 | 8.5 mm | 10 mm | 70 mm | €70,00 | 2-5 εργάσιμες | ||
| ET4JET-9 | 9 mm | 10 mm | 70 mm | €70,00 | 2-5 εργάσιμες | ||
| ET4JET-9.5 | 9.5 mm | 10 mm | 70 mm | €70,00 | 2-5 εργάσιμες | ||
| ET4JET-10 | 10 mm | 10 mm | 70 mm | €70,00 | 2-5 εργάσιμες | ||
| ET4JET-11 | 11 mm | 12 mm | 75 mm | €96,00 | 2-5 εργάσιμες | ||
| ET4JET-12 | 12 mm | 12 mm | 75 mm | €96,00 | 2-5 εργάσιμες | ||
| ET4JET-14 | 14 mm | 16 mm | 85 mm | €160,00 | 2-5 εργάσιμες | ||
| ET4JET-16 | 16 mm | 16 mm | 100 mm | €160,00 | 2-5 εργάσιμες | ||
| ET4JET-18 | 18 mm | 16 mm | 100 mm | €212,00 | 2-5 εργάσιμες | ||
| ET4JET-20 | 20 mm | 20 mm | 105 mm | €265,00 | 2-5 εργάσιμες | ||
| ET4JET-22 | 22 mm | 20 mm | 105 mm | €344,00 | 2-5 εργάσιμες | ||
| ET4JET-25 | 25 mm | 25 mm | 120 mm | €423,00 | 2-5 εργάσιμες | ||
Τιμές χωρίς ΦΠΑ 24%
The EH913 series range from 2-25mm diameter. These 35° Helix End Mills have 4 flutes and a plain shank. The Jet Power range from YG-1 have exceptional tool life suitable for high speed machining of Titanium, Hastelloy, Stainless Steel, Inconel and Steel (Under HRc45). The reinforced cutting edge reduces chipping of corner edges.
- Extreme Machining of Titanium, Inconel, Hastelloy, Stainless Steel & Steels (Under HRc45)
- HSC (Suitable for high speed machining)
- Reinforced cutting edge reduces chipping of corner edges
- TiALN coated ultrafine micrograin carbide substrate
- Inox geometry flute design
