Μετάβαση στο περιεχόμενο
Δωρεάν μεταφορικά άνω 50€ - Αυθημερόν αποστολές για παραγγελίες μέχρι τις 4:30 μμ
Δωρεάν μεταφορικά άνω 50€ - Αυθημερόν αποστολές για παραγγελίες μέχρι τις 4:30 μμ

PCE-TDS 100HS - Ροόμετρο Υπερήχων Ø20-108mm

από Pce
 Pce
Κωδικός Τιμή ** Στοκ
PCE-TDS 100HS €1.458,00 Με παραγγελία


Τιμές χωρίς ΦΠΑ 24%


Measuring range -32 ... +32 m/s
Resolution 0.0001 m / s
Accuracy ±1 % of measured value
Units meters, feet, cubic meters, liters, cubic feet, gallon, oil barrel, liquid barrel, million gallon
Linearity 0.5 %
Repeatability 0.2 %
Response time 0 ... 999 seconds, freely configurable
Pipe diameter DN 15 … 100, 20 … 108 mm / approx. 3/4 ... 4"
Measuring media Virtually all homogeneous liquids, including sanitary, corrosive and abrasive liquids
Head Type S1
Cable length Approx. 5 m / 16.4 ft each (x 2)
Display 4 x 16 LCD, 7 digits for net flow, positive and negative flow
Power supply 3 x AAA Ni-H rechargeable batteries
Battery life Approx. 10 hours continuous use at full charge
Battery charger 100 .. 240 V / AC
Interface RS-232C
Memory Stores up to 2,000 values
Housing material ABS plastic
Dimensions Device: 100 x 66 x 20 mm / 3.93 x 2.60 x 0.79 "
Transducers: Each 60 x 45 x 45 mm / 2.36 x 1.77 x 1.77"
Operating temp. 0 ... +70 ºC / +32 ... +158 ºF
Weight 514 g / 1.14 lb (with batteries)

λειτουργίες

PCE-TDS 100HS HVAC Meter
Measures liquid flow velocity in pipes and tubes with a diameter of 20 … 108 mm / ≈ 3/4 ... 4"

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow meter or HVAC meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 ... 4". Ideal for use in oil and gas, water and wastewater, chemical, food and beverage, pharmaceutical, metals and mining, pulp and paper, power and heating, ventilation, air conditioning and refrigeration (HVACR) industries, this ultrasonic flow meter features user-friendly velcro-strap clamps that allow for quick and easy repositioning of the electroacoustic transducers.


Calculation of flow velocity according to in-transit time measurement follows the equation:

v = measured velocity
T1 = run time of the ultrasonic signal in the flow direction
T2 = run time of the ultrasonic signal against the flow direction
L = length of the ultrasonic wave
α = ultrasonic signal angle to the flow

Note: To transfer data to a computer, SOFT-PCE-TDS software is required. SOFT-PCE-TDS software sold separately - see accessories for details.

- 0.5 % linearity
- 0.2 % repeatability
- Bi-directional flow measurement
- Quick and adjustable response time
- Eliminates interfering frequencies
- Includes data logger functionality
- Stores up to 2000 measurement values
- Auto power-off battery-saving function (can be disabled)
- Saves time- and date-stamped measurement data to internal memory
- Factory-calibrated, rechargeable, battery-operated flow measuring device

Note: To transfer data to a computer, SOFT-PCE-TDS software is required. SOFT-PCE-TDS software sold separately - see accessories for details.

περιλαμβάνει
1 x PCE-TDS 100HS HVAC meter
2 x sensors TDS-S1 (PCE-TDS 100HS)
2 x 5 m / 16.4 ft transducer connection cables
2 x velcro-strap clamps
3 x AAA Ni-H rechargeable batteries
1 x battery charger
1 x container of coupling gel
1 x measuring tape
1 x carrying case
1 x user manual
1 x factory calibration certificate
video