ΚΩΔ.ET4-BLUE
ΚΩΔ.ET4-BLUE
Κονδύλι 4Φτερο Καρβιδίου Blue Sharp Βαμμένα
Carbide (Solid Carbide - Καρβίδιο)Extra ShortBlue Coating (Nano-layered AlTiN/Si)
Καταλληλότητα Υλικών ISO
P
Ατσάλι
○
M
Ανοξείδωτο
K
Μαντέμι
N
Αλουμίνιο
S
Τιτάνιο
H
Σκληρυμένο
●
● Βέλτιστη καταλληλότητα · ○ Περιορισμένη
- Nanograin carbide substrate with blue silicone based coating.
- Dry machining in steels and hardened steeld < HRc70.
- Suitable for machining at extreme cutting speeds.
- High abrasion resistance with a mirror surface finish.
- Strong negative land provides tool strength for high hardness machining.
- Ultimate tool life.
- Can cope with extreme heat (up to 1400°)
- Long neck for extended reach.
- To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).
Αποστολή αυθημερόνγια παραγγελίες έως 15:00
Δωρεάν μεταφορικάάνω των 80€ (με ΦΠΑ)
Διαθεσιμότητα & τιμή
11 κωδικοί
| Κωδικός | D1 (mm) | D2 (mm) | D3 (mm) | L1 (mm) | L2 (mm) | L3 (mm) | Διαθεσιμότητα | χωρίς ΦΠΑ | με ΦΠΑ | Καλάθι |
|---|---|---|---|---|---|---|---|---|---|---|
| ET4-BLUE-1.5 | 1 | 6 | 0.95 | 1.5 | 50 | 3 |
€38,20
|
€47,37
|
||
| ET4-BLUE-2 | 2 | 6 | 1.95 | 2 | 50 | 5 |
€38,20
|
€47,37
|
||
| ET4-BLUE-3 | 3 | 6 | 2.85 | 3 | 55 | 8 |
€38,20
|
€47,37
|
||
| ET4-BLUE-4 | 4 | 6 | 3.85 | 4 | 55 | 10 |
€38,20
|
€47,37
|
||
| ET4-BLUE-5 | 5 | 6 | 4.85 | 5 | 55 | 13 |
€38,20
|
€47,37
|
||
| ET4-BLUE-6 | 6 | 6 | 5.85 | 6 | 55 | 15 |
€38,20
|
€47,37
|
||
| ET4-BLUE-8 | 8 | 8 | 7.7 | 8 | 65 | 20 |
€51,60
|
€63,98
|
||
| ET4-BLUE-10 | 10 | 10 | 9.7 | 10 | 75 | 25 |
€77,00
|
€95,48
|
||
| ET4-BLUE-12 | 12 | 12 | 11.7 | 12 | 85 | 28 |
€107,00
|
€132,68
|
||
| ET4-BLUE-16 | 16 | 16 | 15.7 | 16 | 90 | 32 |
€179,00
|
€221,96
|
||
| ET4-BLUE-20 | 20 | 20 | 19.7 | 20 | 105 | 40 |
€295,00
|
€365,80
|
The YG-1 G8A02 series X5070 Blue ultrafine micrograin carbide cutter has 4 flutes and a plain shank. These end mills have an extended/relieved neck and range in diameter from 1mm-20mm. The X5070 range is designed for ultra-performance machining of steels, heat resistant steels and hardened steels up to HRc70. The nanograin substrate and silicone based coating allows for dry machining up to temperatures of 1400°c.
- Nanograin carbide substrate with blue silicone based coating.
- Dry machining in steels and hardened steeld < HRc70.
- Suitable for machining at extreme cutting speeds.
- High abrasion resistance with a mirror surface finish.
- Strong negative land provides tool strength for high hardness machining.
- Ultimate tool life.
- Can cope with extreme heat (up to 1400°)
- Long neck for extended reach.
- To achieve the maximum performance from this tool, we recommend using a high performance tool holder (Hydraulic chuck, shrink chuck, HP3/GSK or power milling chuck).
Επίσημος αντιπρόσωπος
Yg
Το προϊόν ανήκει στη συλλογή
Δείτε όλα
Κονδύλια
Βλέπετε ένα προϊόν αυτής της κατηγορίας. Δείτε ολόκληρη τη γκάμα.
85 προϊόντα
Σχετικές κατηγορίες
Όλες οι κατηγορίες →
Αποθήκευση στα Αγαπημένα