Το Μικρόμετρο σπειρωμάτων είναι ένα εξειδικευμένο εργαλείο μέτρησης που χρησιμοποιείται για την ακριβή μέτρηση της μέσης διαμέτρου (Pitch Diameter)...

Measure the web thickness of drills, small grooves and keyways Ratchet stop Carbide tips Supplied with setting standards (except 0-25mm).

Measure splined shafts, slots and keyways Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Measure root tangent length of gear Ratchet stop Supplied with setting standards.

Resolution: 0.001mm/0.00005" Repeatability: 1μm Measuring force: 5-10N Non-rotating spindle, suitable for cylinders Quick measurement: one turn of...

Measure diameter of wires and small balls Ratchet stop Carbide measuring faces.

Το μικρόμετρο κονσερβας είναι ένα εξειδικευμένο εργαλείο μέτρησης που χρησιμοποιείται για τη μέτρηση των διαστάσεων των ραφών κονσερβών, ιδιαίτερα ...

Ratchet stop Carbide measuring faces Supplied with setting standards Optional accessory: dial indicators (graduation 0.01mm), digital indicators (...

Measure thickness of disk brakes Ratchet stop Carbide measuring faces Supplied with setting standards.

Carbide measuring faces Meet DIN863 Ratchet stop Supplied with setting standards (except 0-25mm).

Measure the groove diameter of shafts and keyways Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm).

Measure the groove diameter of shafts and keyways Resolution 0.001mm/0.00005" Non-rotating spindle Button function: on/off, set, mm/inch, ABS/INC,...

Measure the height of crimp contact Resolution 0.001mm/0.00005" IP54 dust/waterproof Button function: on/off, set, mm/inch, ABS/INC, data output D...

Measure splined shafts, slots and keyways Resolution 0.001mm/0.00005" IP54 dust/waterproof Button function: on/off, set, mm/inch, ABS/INC, data ou...

Measure width of grooves inside bores Non-rotating spindle Two graduations for inside and outside measurement.

Deep frame suitable for sheet metal, paper and plastic Ratchet stop Carbide measuring faces.

Measure root tangent length of gear Non-rotating spindle Ratchet stop Supplied with setting standards.

Non-rotating spindle Ratchet stop Supplied with 7 pairs of anvil/spindle tip Setting standards are included (except 0-25mm) Optional accessary: 55...

Non-rotating spindle Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Measure hub thickness and shoulder inside a bore Ratchet stop Carbide measuring faces Supplied with setting standards (except 0-25mm).

Measure tube thickness, shoulder edge distance, rivet head height, etc Supplied with flat anvil and rod anvil Ratchet stop Carbide spindle tip Set...