Measurement range 0 ... 1500 µm Measurement accuracy ± (1 µm + 3%L), where L is the measured thickness Reading 0.1 µm i...

Measurement range 0 ... 1250 µm (0 ... 49.2 mils) Reading 1 µm (0.039 mils) Accuracy ± (2 µm + 3%L) or ± (0.079 mils + 3%L), where L is t...

Suitable for both magnetic and non-magnetic metal substrates. It can measure the thickness of non-magnetic coating and non-metallic coating on magn...

Range: 0~2000 µm Accuracy: ±(2μm + 3%L), where L is the measured thickness in μm Suitable for both magnetic and non-magnetic metal substrates 3 m...

The paint-coating (FE) thickness gauge measures the thickness of non-magnetic coating and non-metallic coating on a magnetic metallic substrate. ...

Sensor Type F and Type N Type F Measurement range 0 ... 5000 µm / 0 ... 5 mm / 0 ... 196 mm Measurement ac...

It can measure thin coatings below 10μm Suitable for both magnetic and non-magnetic metal substrates It can measure the thickness of the non-magne...

Made of stainless steel.

Dry film thickness gauges are used to inspect finished coatings. Mechanical coating thickness gauges provide many advantages. They are very han...

Measurable substrates Fe, NFe Sensor internal Measurement range 0… 1500 µm Reading 0.1 µ...

Measurement range 0 ... 1250 µm / 0 ... 50 mils Accuracy ± (2% + 2 µm) / ± (2% + 0.1 mils) Analysis 0.1 µm / 0.1 mil Operating temperatur...

Measurement range 0 ... 1250 µm / 49.2 mils Reading 0.1 µm / 0.004 mils (ranging from 0.0 to 99.9 µm / 3.9 mils) 1 µm / 0.04 mils...

Measurement range 0 ... 1250 µm, 0 ... 49.2 cm Minimum substrate coating thickness 50 µm Minimum measuring area (diameter) 10 mm Minimum ...

Frequency range 0.01 ... 16000 kHz Sensor supply voltage 0, 5, 1, 2, 4, 6V Phase shift of the signal...

Measurement range Fe: 0 ... 1500 µm   NFe: 0 ... 1500 µm Accuracy ±(2 % of reading + 1 µm) Reading 0.1 µm (<100...

Measurement range Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm Accuracy after membrane calibration ±(1.0 % of measured value + ...

Cup diameter 20mm / 0.8in Maximum sadness 12mm / 0.5in Reading 0.01 mm Maximum compressive strength 2500 N Dimensions 290 x 230 x ...

Cup diameter 20mm / 0.8in Maximum sadness 12mm / 0.5in Reading 0.01 mm Maximum compressive strength 2500 N Dimensions 290 x 230 x ...

The paint-coating (FE) thickness gauge measures the thickness of non-magnetic coating and non-metallic coating on a magnetic metallic substrate. ...