Measurement range 0 ... 1500 µm Measurement accuracy ± (1 µm + 3%L), where L is the measured thickness Reading 0.1 μm in the measuring r...

Technical Specifications Measurement range: 0~3000 μm Reading: 0.1 μm (for range 1 μm (for range 100~1000 μm) 0.01 mm (for range 1~3 mm)...

Technical Specifications Measurement range: 0–3000 μm Reading:• 0.1 μm (range • 1 μm (range 100–1000 μm)• 0.01 mm (range 1–3 mm) Accuracy: ±(...

Range: 0~5000 μm Accuracy: ±(2μm + 3%L), where L is the measured thickness in μm Suitable for both magnetic and non-magnetic metal substrates 3 ...

Suitable for both magnetic and non-magnetic metal substrates. Can measure the thickness of non-magnetic coating and non-metallic coating on a magn...

The paint - coating thickness gauge (FE) measures the thickness of non-magnetic coating and non-metallic coating on a magnetic metal substrate. ...

  Sensor Type F and Type N Type F   Measuring range 0 ... 5000 μm / 0 ... 5 mm / 0 ... 196 mm Measurement accuracy ± (2% + 1 μm) Rea...

Measuring range 0 ... 1250 μm (0 ... 49.2 mils) Reading 1 μm (0.039 mils) Accuracy ± (2 μm + 3%L) or ± (0.079 mils + 3%L), where L is the...

  Can measure thin coatings below 10μm Suitable for both magnetic and non-magnetic metal substrates Can measure the thickness of the non-magnetic ...

  Measuring range 0 ... 1250 µm / 49.2 mils Reading 0.1 µm / 0.004 mils (in range from 0.0 to 99.9 µm / 3.9 mils)1 µm / 0.04 mils (above rang...

Technical Specifications Measurement range: 0–1500μm (FM & NM) Reading: 0.1μm ( Accuracy: Zeroing: ±(1μm+2%L) Single-point calibration: ±...

Technical Specifications Sensor types: Magnetic induction sensor (FM - included), optional FL, FX, FS, FH, NM Measurement range: 0~1500μm (FM),...

Made of stainless steel.

For the inspection of final coatings, dry film thickness gauges are used. Mechanical coating thickness gauges offer many advantages. They are v...

Frequency range 0.01 ... 16000 kHz Sensor power supply voltage 0, 5, 1, 2, 4, 6V Signal phase shift 0 ... 360° Sampling fre...

Cup diameter 20 mm / 0,8 in Maximum compression 12 mm / 0,5 in Reading 0,01 mm Maximum compression force 2500 N Dimensions 290 x 2...

A rotational abrasion tester, also known as a Taber Abraser or Taber Wear Tester, is a device used to assess the resistance and durability o...

For calibration or accuracy check of coating thickness gauges Optimization of measurement accuracy after sheet calibration Uniformity: ±0.3 μm (&l...

Technical Specifications Measurement range: 0.05–10mm (adjustable for coatings >10mm) Output voltage: 0.6–30.0kV (continuously adjustable) ...