New Products

Τεχνικές Προδιαγραφές Τύπος: Collet αντάπτορας ταχείας αλλαγής για κολαούζα με συμπλέκτη ασφαλείας (safety clutch) Χρήση: Σύσφιξη/τοποθέτηση...

Specifications Type: Quick change adaptor for taps Version: Without safety clutch (no torque limiter) Application: Clamping/mounting taps fo...

Τεχνικές Προδιαγραφές Τύπος: Collet για κολαούζα (tap collet) με στεγανοποιητικό (sealed) και καρέ Σύστημα: ER Πρότυπο: ISO 15488 Runo...

Τεχνικές Προδιαγραφές Τύπος: Collet για κολαούζα (Tap collet) με καρέ Σύστημα: ER Πρότυπο: ISO 15488 B (DIN 6499 B) Runout: ≤ 15 μm ...

Τεχνικές Προδιαγραφές Τύπος: Collet “Reduction” sealed (μειωτικό χιτώνιο) για υδραυλικούς κώνους / hydraulic expansion chucks Εφαρμογή: για ...

Τεχνικές Προδιαγραφές Τύπος: Collet (reduction sleeve) “Reduction” sealed για υδραυλικούς κώνους (hydraulic expansion chucks) Εφαρμογή: Για ...

Τεχνικές Προδιαγραφές Τύπος: Collet reduction (μειωτικό) για υδραυλικούς κώνους/μανδρέλια υδραυλικής εκτόνωσης (hydraulic expansion chucks) ...

Τεχνικές Προδιαγραφές Κατηγορία: Μειωτικό/δακτύλιος προσαρμογής (reduction sleeve) για σύστημα τσοκ φρεζαρίσματος υψηλής απόδοσης HKS Χρήση:...

Τεχνικές Προδιαγραφές Τύπος: Reduction sleeve / collet για σύστημα υψηλής απόδοσης HKS (Kemmler) Μέγιστο runout: ≤ 5 μm Εφαρμογή: Για σύσ...

Specifications Manufacturer: Kemmler Type: Sealed precision collet System: KPS Max TSC (through-spindle coolant) pressure: up to 100 bar ...

Τεχνικές Προδιαγραφές Κατασκευαστής: Kemmler Σύστημα: KPS Τύπος: Collet ακριβείας (precision collet) Μέγιστο runout: ≤ 5μm Εφαρμογή...

Τεχνικές Προδιαγραφές Κατηγορία: Collet ακριβείας τύπου OZ (OZ System) Πρότυπα: ISO 10897-B, DIN 6388 B Μέγιστο runout: 5 μm Εφαρμογή/συμβατότ...

Τεχνικές Προδιαγραφές Τύπος/Σύστημα: OZ system (Type OZ) Πρότυπο: ISO 10897-B (DIN 6388 B) Μέγιστο runout: ≤ 15 μm Εφαρμογή: σύσφιξη ε...

Specifications Type: ER Sealed collet with cooling channels along the bore System: ER (Type ER) Standard: ISO 15488 B (DIN 6499 B) Runout:...

Τεχνικές Προδιαγραφές Τύπος: Collet ακριβείας ER με οπές/κανάλια ψυκτικού (sealed) και έξτρα τρύπες για ψυκτικό Σύστημα: ER Πρότυπο: ISO ...

Specifications Type: ER collet (ER system), sealed with coolant holes/channels Standard: ISO 15488 B (DIN 6499 B) Runout: ≤ 15 μm Max cool...

Specifications Type: ER precision collet, sealed for high-pressure coolant System: ER Max coolant pressure: up to 120 bar Accuracy (runout...

Τεχνικές Προδιαγραφές Τύπος/Σύστημα: ER (sealed) Υλικό: Ατσάλι Μέγιστη πίεση ψυκτικού (high pressure cooling): έως 120 bar Ακρίβεια (r...

Specifications Type: ER Sealed collet (sealed) for internal coolant (IK) System: ER Standards: ISO 15488 B (DIN 6499 B) Runout: ≤ 15 μm ...

Τεχνικές Προδιαγραφές Τύπος: Collet ακριβείας ER (ER system) Πρότυπα: ISO 15488 B (DIN 6499 B) Υλικό: Ανοξείδωτος χάλυβας (Edelstahl) 1.4...

Specifications Type: ER-system precision collet Runout: < 3 μm Standard: ISO 15488 B (DIN 6499 B) Application: clamping straight-shank ...

Specifications Type: ER precision collet (ER system) Standards: ISO 15488 B (DIN 6499 B) Runout: ≤ 5 μm Application: clamping straight-sha...

Τεχνικές Προδιαγραφές Τύπος: Collet ER (ER system) Πρότυπα: ISO 15488 B, DIN 6499 B Runout: ≤ 15 μm Εφαρμογή: σύσφιξη εργαλείων με κυλ...

Specifications Type: 4.5° shrink fit chuck/holder with coolant channels Application: Clamping straight-shank tools (HM & HSS) Standard: ...

Τεχνικές Προδιαγραφές Τύπος: Shrink Fit υποδοχή (Schrumpffutter) 4,5° για εργαλεία με κυλινδρικό στέλεχος Εφαρμογή: σύσφιξη στελεχών εργαλεί...

Specifications Type: 3° shrink fit chuck/arbor (slim – reduced interference contour) Taper: BT (per model table) Application: for clamping s...

Τεχνικές Προδιαγραφές Τύπος: Υδραυλικό τσοκ διαστολής (hydraulic expansion chuck) με κώνο BT Πρότυπα κώνου: ISO 7388-2 / JIS B 6339 Εφαρμ...

Specifications Type: Boring bar blank with BT taper Standard: ISO 7388-2 (JIS B 6339) Form: Form J (A) Application: for manufacturing spec...

Τεχνικές Προδιαγραφές Τύπος: Κώνος BT (test arbor) για έλεγχο ατράκτου/κωνικής υποδοχής Πρότυπα: ISO 7388-2, JIS B 6339 Εφαρμογή: Έλεγχος...

Specifications Type: BT milling arbor/holder for screw-in cutter heads Kemmler (COPY MILL) Application: For mounting screw-in cutters with thr...

Specifications Type: BT taper drill chuck adaptor Standard: DIN 238 Compatible standards: ISO 7388-2, JIS B 6339 Form: Form A Accuracy: ...

Τεχνικές Προδιαγραφές Τύπος: SYNCHRO tapping chuck (κολαούζα συγχρονισμού) για collets συστήματος ER Πρότυπα: DIN 6499 / ISO 15488 (ER colle...

Τεχνικές Προδιαγραφές Τύπος: Κώνος BT για ταχυσύνδεσμο κολαούζων TC (tapping chuck) χωρίς αντιστάθμιση μήκους σε θλίψη και εφελκυσμό Πρότυπα...

Τεχνικές Προδιαγραφές Τύπος: Ταχυσύνδεσμος κολαούζων (quick change tapping chuck) με αντιστάθμιση μήκους σε θλίψη και εφελκυσμό Πρότυπο: ISO...

Specifications Type: Automatic CNC drill chuck for clockwise and counter-clockwise rotation Application: Clamping tools with straight (cylindr...

Τεχνικές Προδιαγραφές Τύπος: Κώνος/άξονας για φρεζοκεφαλή (shell mill holder) με εγκάρσια σφήνα (Quernut) Πρότυπα: DIN 6357 Κώνος μηχανής...

Specifications Type: Combi shell end mill holder (DIN 6358) Taper: BT (per ISO 7388-2 / JIS B 6339) Standard: DIN 6358 Bore diameter toler...

Specifications Type: End mill holder DIN 6359 with coolant channels Taper (SK): ISO 7388-2 (JIS B 6339) – available in BT 40 / BT 50 (dependin...

Specifications Type: Weldon end mill holder to DIN 6359 for straight-shank tools to DIN 1835-B (Form B) Taper: BT (SK) Taper standard: ISO 7...

Specifications Type: End mill holder (Weldon) DIN 6359 for cylindrical shanks DIN 1835-B Machine taper: ISO 7388-2 (JIS B 6339) Form: AD/B ...

Specifications Manufacturer: Kemmler Type: High Performance Milling Chuck System: HKS Taper: BT (available in BT40 / BT50) Collet (clamp...

Specifications Manufacturer: Kemmler Type: BT taper collet chuck for KPS system collets Collet system: KPS Standards: ISO 7388-2 (JIS B 63...

Specifications Type: Precision ER collet chuck for collets ISO 15488 (DIN 6499) / ER system Taper standard: ISO 7388-2 (JIS B 6339) Balancin...

Specifications Type: BT taper collet chuck for ER collets (ER system - Mini) Collet standard: ISO 15488 (DIN 6499) Taper standard: ISO 7388-...

Specifications Type: BT taper collet chuck for ER system (ISO 15488 / DIN 6499) Taper standard: ISO 7388-2 (JIS B 6339) Balancing: G2.5 at 2...

Specifications Type: BT taper holder for ER collet chuck system Collet system: ISO 15488 (DIN 6499) ER-system Balancing: G2.5 at 25,000 min-...

Specifications Type: Electronic Z-axis zero-setter with magnet Order no.: 702.4.19 Reference height: 50 mm DCONMS: 54 mm OAH: 50 mm DO...

Specifications Type: Z-axis zero-setter (without magnet) Reference height (OAH): 50 mm DCONMS: 62 mm DCONWS: 25 mm Description Z-axis zer...

Specifications Type: Z-axis zero-setter with magnet Reference height: 50 mm OAL: 52 mm OAW: 52 mm OAH: 50 mm DCONWS: 25 mm Order no....

Specifications Type: Electronic 3D edge finder with spherical tip Order no.: 702.3.16 DCONMS (mm): 16 OAL (mm): 110 DCONWS (mm): 10 Co...

Specifications Model / Order no.: 702.16 DCONMS: 16 mm OAL (overall length): 100 mm DCONWS: 10 mm Concentricity: ±0.01 mm Design: spri...

Specifications Type: Collet chuck/holder for OZ collet system Standards: ISO 10897 (DIN 6388) for OZ collets, DIN 6391 (collet chuck body) M...

Specifications Type: Mechanical edge finder Application: Alignment of workpiece reference surfaces or edges Recommended spindle speed: ~600 ...

Specifications Type: Shell mill holder with transverse groove (Quernut) Taper: SK (ISO 7388-1) Cutter mounting standard: DIN 6357 Contact ...

Specifications Type: End mill holder for straight-shank tools with lateral flat (Weldon) Taper: SK (DIN 69871) Standards: DIN 6359, for tool...

Specifications Type: End mill holder DIN 6359 for straight shanks DIN 1835-B (Weldon) Taper: SK (per ISO 7388-1 / DIN 69871) Application: Cl...

Specifications Type: SK taper collet chuck for ER system Collet system: ISO 15488 (DIN 6499) ER-system Taper standards: ISO 7388-1 / DIN 698...

Specifications Type: Collet chuck for ER collets Collet system: ISO 15488 (DIN 6499) ER-system Taper: SK (per ISO 7388-1 / DIN 69871) Accu...

Specifications Type: 3° shrink fit chuck (slim design / reduced interference contour) Taper: SK (steep taper) Application: clamping straight...

Specifications Type: 4.5° shrink fit holder with coolant channels Taper: SK (DIN 69871) Standard: ISO 7388-1 Application: Clamping/mountin...

Specifications Type: 4.5° shrink fit chuck/toolholder (Schrumpffutter 4,5°) Machine taper: SK (available in SK 30 / SK 40 / SK 50) Applicati...

Specifications Type: Hydraulic expansion chuck, SK taper Taper standards: ISO 7388-1, DIN 69871 Tool application: For straight-shank tools a...

Specifications Type: Test arbor for machine tool spindle inspection Standards: ISO 7388-1, DIN 69871 Tolerance: 0.003 mm Max. concentricit...

Specifications Type: Boring bar blank Taper: SK (Form A) Standard: ISO 7388-1 (DIN 69871) Application: For the manufacturing of special/cu...

Specifications Type: SYNCHRO TAPPING CHUCK for ER system Taper: SK (per ISO 7388-1 / DIN 69871) Clamping system: ER collet to DIN 6499 (ISO ...

Specifications Type: Quick-change chuck/holder for SYNCHRO TAPPING CHUCK (TC) Length compensation (Z): Without length compensation in compress...

Specifications Type: Quick change tapping chuck with length compensation in compression and expansion Taper: SK (DIN 69871) Standard: ISO 73...

Specifications Type: SK taper adaptor for drill chucks (drill chuck adaptor) Standards/Compliance: DIN 238, ISO 7388-1, DIN 69871 Form: Form...

Specifications Type: Combi shell end mill holder according to DIN 6358 Machine taper: SK (ISO 7388-1 / DIN 69871) Form: AD/AF (AD/B) Seat ...

Specifications Type: Adaptor sleeve (intermediate sleeve) for SK toolholders Standards/Compliance: ISO 7388-1, DIN 69871 Application: For ho...

Specifications Type: Milling arbor/holder for screw-in cutters with thread Machine taper: SK (selected by variant) Cutter thread: THSZWS (se...

Specifications Type: End mill holder DIN 6359 with coolant channels Machine taper: SK (per ISO 7388-1 / DIN 69871) Compatible tools: Straigh...

Specifications Manufacturer: Kemmler System: HKS Type: High Performance Milling Chuck (High Clamping Force) Machine taper: SK (available i...

Specifications Type: Precision ER collet chuck for ER system Standards / Compatibility: ISO 7388-1 (DIN 69871) / collets ISO 15488 (DIN 6499) ...

Specifications Manufacturer: Kemmler Type: Collet chuck for KPS system collets Taper: SK (available in SK 30 / SK 40 / SK 50 depending on ve...

Specifications Type: Collet chuck DIN 6391 for OZ collets Collet system: OZ (for collets ISO 10897 / DIN 6388) Taper: SK (DIN 69871), Form A...

Specifications Type: SK taper collet chuck for ER system - Mini Standards/Compatibility: ISO 15488 (DIN 6499) ER system, ISO 7388-1, DIN 69871...

Specifications Type: Pull stud for tool holders Standard: ISO 7388-1 Thread (THSZMS): DECKEL asymmetrical S 20 x 2 Order no.: 401.20.16.5 ...

Specifications Type: Pull stud BT/SK30, Form JF (Fanuc Robodrill + Brother + Dual contact) Taper shank standards: ISO 7388-1 (formerly DIN 698...

Specifications Type: Pull stud, shank form JF for MAS BT Standard: ISO 7388-3 Former standard/reference: JIS B 6339 (MAS 403 BT) Coolant s...

Specifications Type: Pull stud for CAT, metric, for high-pressure coolant Form: Form UD Construction: drill-through (through bore) Sealing...

Specifications Type: Pull stud CAT metric, type “MAZAK” Form: Form UD (with drill through), incl. O-ring Tool taper shank standard: ISO 7388...

Specifications Type: Pull stud similar to ISO 7388-3, lengthened by 3 mm, “MAZAK” type Shank form: UD Coolant supply: Centric inner coolant/...

Specifications Type: Pull stud ISO 7388-3, shank form UF Standard: ISO 7388-3 (formerly ISO 7388) Coolant/lubricant supply: without (without...

Specifications Type: Pull stud for Mori Seiki, shank form AD Coolant supply: Centric inner cooling supply Sealing: With O-Ring in the hole ...

Specifications Type: Pull stud similar to ISO 7388-3 Shank form: AD Length: lengthened by 3 mm Coolant supply: centric inner cooling suppl...

Specifications Type: Pull stud, form AF with O-ring Standard: ISO 7388-3 Former standard: DIN 69872 B (DIN 69872 Form B) Coolant/lubricant...

Specifications Type: Pull Stud Form AD with drill-through hole and O-Ring Standard: formerly DIN 69872 A BHTA angle: 15° Dimensions (per d...

Specifications Type: Pull Stud Form AD without O-Ring Standard: ISO 7388-3 Form: AD Angle (BHTA): 15° Dimensions: per technical drawing ...

Specifications Type: Pull stud for Biesse and Leuco, without cooling lubricant supply Design: sealed / without O-ring Thread (CRKS): M12 O...

Specifications Type: Pull stud ISO 7388-3 Shank form: JD Coolant/lubricant supply: centric inner supply Standards/Equivalents: ISO 7388-3,...

Specifications Type: Pull stud ISO 7388-3, shank form UD Coolant supply: Centric inner cooling supply Standard: ISO 7388-3 (formerly ISO 738...

Specifications Type: Pull stud type “Haas”, similar to ISO 7388-3 Length: shortened by 3 mm Compatibility: for tools with taper shanks ISO 7...

Specifications Type: Pull stud DIN 2080 with Ott-groove (Ott-Ringnut) Tool interface standard: ISO 7388-1 (for conversion to DIN 2080) Threa...

Specifications Taper standard: DIN 2080 (SK) Collet system: ER per ISO 15488 (DIN 6499) Application: holding straight-shank tools in ER coll...

Specifications Type: Drill chuck adaptor Standards: DIN 238, DIN 2080 Application: For mounting drill chucks Form: Form A Accuracy: ≤ 5 ...

Specifications Type: Automatic CNC drill chuck for clockwise and counterclockwise rotation Taper: SK (available versions SK 30 / SK 40 / SK 50...

Specifications Type: Adapter/reduction sleeve for Morse taper with tang Application: For mounting tools with Morse taper shank and tang accord...

Specifications Type: Combi shell mill holder / milling arbor Standards: DIN 6358, DIN 228 Form: Form A Tolerance: h6 Application: For mo...

Specifications Type: End mill holder for Weldon straight shanks Standards: DIN 6359 (holder), for tools to DIN 1835-B (Form B / Weldon) Mach...

Specifications Type: Tightening fixture / mounting block for tools with steep taper shank Material: Aluminium Application: Assembly device f...

Specifications Type: Mechanical precision machine vise Clamping positions: horizontal, vertical, or lateral Body: steel body, hardened and a...