3D-Sensor Digital
The Digital 3D-Sensor is a further development of the time-proven mechanical 3D-Sensor. It serves for approaching workpiece edges on milling and EDM machines.
The spindle may be positioned quickly and safely on the reference edge. The approaching operation can be exactly monitored on the digital display. The zero points can be set without any calculations because the spindle axis is positioned exactly on the approached edge.
The digital display has large numbers that measure in increments of 0.001 [mm]. It can be easily read from a long distance (i.e. when mounted on a large machining center). The digital display is water- and dust-proofed according to IP 64 and can be stored in the tool magazine of the machine.
Please take note: The given measuring precision of 0.005 [mm] only applies if the original HAIMER probe tips are used.
Included in delivery: 3D-Sensor Digital with clamping shank Ø 20 mm, short probe tip Ø 4 mm
Technical data subject to change without prior notice.
Probe tips
The sensors can be equipped with a short (ball Ø 4 mm) and a long (ball Ø 8 mm) probe tip. The probe tips may be changed without any tool, no re-calibration of the unit is needed.
The probe tips of course are compatible with all HAIMER 3D-Sensors.
Technical drawing
Technical Data
| L1 [mm] | 113 |
|---|---|
| L2 [mm] | 50 |
| Ø D1 [mm] | 20 |
| Ø D2 [mm] | 4 |
| B [mm] | 65 |
| Smallest unit of measure [mm] | 0,001 |
| Repeatability [mm] | 0,005 |
| Measuring accuracy [mm] | 0,005 |
| Display mode | inch / metric |
| Display size [mm] | 45 x 23 |
| Height of numbers [mm] | 8,5 |
| Service life of battery approx. (continuous operation) [hrs] | 3000 |
| Order No. | ||
|---|---|---|
| 80.460.00.FHN |
IPXY
-
X = Protection against solid objects & access to hazardous parts
-
Y = Protection against water ingress
| Value | 1st Digit – Solids / Access | 2nd Digit – Water |
|---|---|---|
| 0 | No protection | No protection |
| 1 | Protection against solids ≥50 mm (test probe Ø50 mm) | Vertical falling drops |
| 2 | Protection against solids ≥12.5 mm (test probe Ø12.5 mm) | Drops with tilt up to 15° |
| 3 | Protection against solids ≥2.5 mm (test probe Ø2.5 mm) | Spraying up to 60° |
| 4 | Protection against solids ≥1 mm (test probe Ø1 mm) | Splashing from all directions |
| 5 | Protection against dust (limited ingress without harmful effects) | Water jets (nozzle 6.3 mm) |
| 6 | Complete dust-tightness (dust-tight) | Powerful water jets (nozzle 12.5 mm) |
| 7 | — | Temporary immersion (usually 1 m / 30 min) |
| 8 | — | Continuous immersion (depth & time specified by manufacturer) |
| 9 / 9K | — | High-pressure & high-temperature water jets |
| SKU | Probe Ø | Reading | Shank | Availability |
Price
+VAT
|
Cart
Quote
|
|---|---|---|---|---|---|---|
| 80.460.00.FHN | 4 mm | 0.001 mm | 20 mm | 1 available |
+VAT
€858,00
|
|
| 80.460.00.FHN SK40 | 4 mm | 0.001 mm | SK40 | On Order |
+VAT
€1.171,00
|
Added to cart!
Added to wishlist
Probes for 3D Milling Zero Tester
Genuine HAIMER accessoryCeramic pin is compatible with all HAIMER 3D sensorsCan be replaced without the use of toolsNo device recalibration requi...
View full details