Electrical Instruments

Direct AC test (contact): 12-250V Bidirectional display: voltage shown on LCD and neon lamp lights up (when voltage >80V) Inductive AC test...

Data Hold, MAX function Automatic power off Non-contact voltage Power supply: 2 x 1.5V AAA batteries Continuity alarm: NVC: >50V AC Diode: Open c...

Data Hold function Power supply: 1 x 9V 6F22/NEDA 1604 battery Continuity alarm: Diode: Open circuit voltage 3.0V Transistor hFE: measurement ran...

2000 count digital display Auto range (except 200 mV AC) Data Hold Max Hold Backlit display Low battery indication Automatic power off...

Technical Specifications Built-in Bluetooth Compatible mobile app Display with 9999 counts and backlight True RMS Measurement Relative me...

Functions: DC Voltage Measurement: 600mV/6V/60V/600V/1000V Reading: 0.1mV/0.001V/0.01V/0.1V/1V Accuracy: ±(0.5%+3) AC Voltage Measurement:...

4000 counts LCD display 30mm jaw opening True RMS measurement NCV detection REL (zero) function Data hold Low battery indication Auto power off Sa...

DC A current measurement     Measuring range Reading Accuracy ( from rdg. ) 500 μA 0.01 μA ± (1% + 6 digits) 5000 μA 0.1 μA ± (1% + 6...

Alternating current AC(50 / 60 Hz) Range / Reading / Accuracy2 A / 1-mA / ± 2.8% + 10 dgt80 A / 100-mA / ± 3.0% + 8 dgt Direct current...

Measuring object 12 V starter batteries Battery standards DIN, JIS, IEC, EN, GB, SAE, MCA Measurement time 3 ... 10 seconds Cold Crankin...

Non-contact phase sequence detection, high and low voltage, wire identification Low battery indication Automatic power off Lens Power supply: 2 x ...

AC voltage measurement 50...600.0 V True RMS value Accuracy ±1.5% of measured value Reading +10 digits / 0.1 V AC current measurem...

Measurement operation   AC voltage   Measuring range Reading Accuracy 200 mV 0.1 mV ± (0.8% + 5 digits) 2V 1 mV ± (0.8% + 5 digits)...

Measurements: Split time, total time, continuous time Measurement range: 0~9 hours, 59 minutes, 59.99 seconds Reading: 0.01 s Accuracy: ±0.5 s Po...

Technical specifications Current and leakage current (AC A) Measuring range Reading Accuracy 50 / 60 Hz 400 Hz ... 1 kHz 40 mA 10 μA ±...

Specification Technical specifications Direct Voltage Input Impedance: 1 MΩ Range: 600 V Resolution: 0.1 V Accuracy: ±1% + 2 digits Direct Vo...

Measurement operation AC Reading Measuring range 400 mV 0.1 mV   4V 1 mV   40V 10 mV   400V 100 mV   750V 1V Accuracy ± (1% from ...

Measurement parameter   Measuring range       Reading Accuracy AC Voltage 10 ... 600V 0.1 V ± (0.5% ... 3 digits) Peak to Pe...

Automatic function recognition for measuring AC/DC voltage, resistance, and continuity NCV detection with indication via light and sound Self-...

Voltage measurement 4.0 ... 600.0 V RMS Value ± 0.5% of the measured value ± 5 digits / 0.1 V PEAK voltage (> 10V) 50 Hz - 60 Hz / ± 5% ±...

Voltage (AC / TRMS, 50 ... 200 Hz) 100 / 400 / 750 V, ± (1.2% + 5 digits) Current (AC / TRMS, 50 ... 200 Hz) 40 / 100 / 400 / 1000 A, ± (...

Voltage (ACV) Measuring range Reading Accuracy 10 V ... 600 V (phase to neutral) 0.1 V ±(0.5 % + 0.5 V) 10 V ... 600 V (phase to neutral...

Chronograph Range: 0~23 hours 59 minutes and 59 seconds Resolution: 0.01s (<30 minutes), 1s (>30 minutes) Accuracy: ±1.5s (day error)...

Technical specification Output 125 kHz External Voltage Identification Area DC 12 ... 400 V plus-minus 2.5%; AC 12 ... 400 V...

Specification mA DC current (Maximum load at 1 kΩ, powered by 24 V) Ranges 4 to 20mA / 0 to 20mA / 0 to 24mA Resolution 1microA ...

Specifications: Range: AC 100-250V Neon lamp lifespan: 30,000 uses Dimensions: 145 × Ø15mm Weight: 21g Tester tip: CRV material Description: Volt...

Features: Four-digit LED display Output power indication Output switch control Panel lock function to avoid incorrect operations USB port for pow...

Display: 3.5 inch TFT LCD Basic accuracy: 0.05% Automatic level control Calibration mode: Full scale calibration for open circuit and short cir...

Automatic measurement: Inductance (L), capacitance (C), resistance (R), impedance (Z), quality factor (Q), damping factor (D), phase (θ) and dire...

The digital AC/DC power meter 9670-PM70 offers measurement accuracy of 0.2% and supports an input signal range from 15Hz to 5kHz. It features volta...

Analog bandwidth: 100MHz Channels: 2 Maximum real-time sampling rate: 1GSa/s (non-interleaved mode) Rise time: ≤3.5ns Memory depth: 64kpts W...

Technical Specifications 22000-count digital display Data transmission via USB True RMS Measurement Data hold function Peak/Max/Min funct...

Technical Specifications Display: OLED Temperature range: 100°C – 420°C Power: 10 W Operating time: 30 minutes ("V-P" appears when the batt...

Technical Specifications Display: LCD Temperature range: 100°C – 480°C Temperature stability: ±2°C (in still air and without load) Power: 7...

Technical Specifications Display: IPS Temperature range: 100°C – 450°C / 212°F – 842°F Temperature stability: ±2°C (in still air and without ...

Features: Four-digit LED display Output switch control Panel lock function to avoid incorrect operations USB port for power supply OVP/OCP protec...

Specification DC voltage   Measuring range 600.0 mV DC Resolution 0.1 mV DC Accuracy plus-minus(0.5 % + 8 digits)     Measurin...

Specifications Code / Model: 9917-FC3K61 Rated output voltage: 0~30V Rated output current: 0~120A Maximum output power: 3600W Voltage se...

Specifications Model: 9312-CB120 Display: 6000 counts Jaw opening: 28 mm DC current measurement: 60.00A / 600.0A (resolution 0.01A / 0.1A,...

Specifications Model code: 9457-HD501 AC withstand voltage test: Output voltage: (0~5)kV Voltage resolution (d): 10V Vo...

Specifications Models (vendor codes): 9458-DW61, 9458-AW52 AC withstand voltage test: Output voltage: 0.05kV~5kV Resolution (...

Specifications Parameter Value Measuring range ±20.99 mA DC Resolution 0.01 mA Accuracy ±(0.3...