Amperemeter - Multimeter
| Κωδικός | Τιμή | Στοκ | |
|---|---|---|---|
| PCE-DC2 | €146,00 | 1 διαθέσιμo |
* Κ.Π. : Κατόπιν Παραγγελίας
| Alternating current (50/60 Hz, TRMS) | |
| Measurement range | 0 ... 200.0 A |
| Reading | 0.1 A |
| Accuracy | ±(2.5 % + 8 digits) |
| Direct current | |
| Measurement range | 0 ... 200.0 A |
| Reading | 0.1 A |
| Accuracy | ±(2.0 % + 5 digits) |
| DC voltage | |
| Measurement range | 0 ... 600.0 V |
| Reading | 0.1V |
| Accuracy | ±(1.0 % + 2 digits) |
| AC voltage (50/60 Hz, TRMS) | |
| Measurement range | 0 ... 600.0 V |
| Reading | 0.1V |
| Accuracy | ±(1.5 % + 8 digits) |
| Resistance | |
| Measurement range | 0 ... 999.9 Ω |
| Reading | 0.1 Ohm |
| Accuracy | ±(1.5 % + 8 digits) |
| Further specifications | |
|
Current clamp opening |
18mm / 0.7" |
| Continuity test | <30Ω, test current <0.5mA |
| Battery indicator | "BAT" low battery indicator. |
| Measurement range exceeded | "OL" indication when measurement range is exceeded |
| Measurement percentage | 10 Hz for reading |
| 40 Hz for the bar graph at DC, | |
| DC voltage and resistance measurement | |
| Input resistance | 1.0 MΩ when measuring voltage |
| Screen | LC with backlight |
| Peak measurement response time (PEAK HOLD) | <10 ms |
| Response time of older and | <50 ms |
| lower measurement value (MAX / MIN HOLD) | |
| Operating conditions | -10 ... 50 °C / 14 ... 122 °F, max 3000 m / 9842 ft above sea level |
| Storage conditions | -30 ... 60 °C / -14 ... 140 °F, max 10,000 m / 32,808 ft above sea level |
| Ambient humidity | Maximum 90 % (0 ... 30 °C / 32 ... 86 °F) |
| (RH, non-condensing) | Maximum 75 % (30 ... 40 °C / 86 ... 104 °F) |
| Maximum 45 % (40 ... 50 °C / 104 ... 122 °F) | |
| Power supply | 2 x 1.5V AAA batteries |
| Automatic shutdown | after 10 minutes of inactivity |
| Degree of pollution | 2 |
| Standards | CAT III 600 V, CAT IV 300 V |
| Dimensions | 164 x 65 x 32mm / 6.45 x 2.56 x 1.26" |
| Weight | 175g / 6.17oz |
The PCE-DC2 is designed to detect, indirectly, AC/DC current and Ohms. The clamp meter has built-in white LEDs to illuminate the test point and a non-contact voltage test function. The compact design of this device allows measurements to be taken in places with limited access. The backlit display ensures clear readings, even in places with limited lighting, such as electrical cabinets or wiring ducts. The non-contact voltage testing function not only supports the detection of dangerous voltage potentials, but also provides you with an accurate tool for determining the locations of wire breaks in cable reels, extension cords, and device connection cables.
- LCD with 3 2/3 positions, backlight, clamp for direct current
- Measurement of AC/DC current, AC voltage and ohms
- Memory function, zero reset for DCA, non-contact voltage control
- Lighting of the measurement point
- Automatic range selection
- Auto power off
- Plier opening: 18 mm / 0.7 in
Package contents
1 x PCE-DC2 Ampere Tweezers
2 x Test Leads
1 x Carrying case
2 x Batteries
1 x User Manual
